Vent Collector Duct - Miele NOVOTRONIC T 7634 Operating Instructions Manual

Vent collector duct

To prevent condensed water buildup in
the non-operating dryers:
^ For each dryer, install a non-return
flap R directly on the collector duct.
You will need an optional Miele
accessory* (see right) for this.
When installing from 3 to a maximum
of 5 dryers, the pipe diameterD must
be enlarged.
Number Pipe diameter multiplication
of factor from Table II
dryers
1-2 1
3 1,25
4 - 5 1,5
Installing the dryer vent
1 Connection to connection duct
2 Miele non-return flap*
3 additional Miele Adapter*
4 Vent hose, flexible
^ Press the non-return flap(2) fully into
the Adapter (3).
41