Table of Contents
Advertisement
There may be a technical
fault.
The spray arm is hitting
an item in the basket.
Items are not secure in
the wash cabinet.
This may be caused by
the installation or the di-
ameter of pipe.
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
– Press the "Start/Stop"
button.
– Turn off the dishwasher.
A few seconds later:
– Turn the dishwasher on.
– Select a program.
– Press the "Start/Stop"
button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
Interrupt the program, re-
arrange items blocking
the spray arms.
Interrupt the program and
rearrange loose pieces.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Increase the dosage or
refill the reservoir, see "Be-
fore using for the first
time".
Leave dishes in longer.
41
Hide quick links:
Advertisement
Table of Contents
