Whirlpool W10184516D Installation Instructions Manual page 30

ELECTRONIC CONTROL SETUP INSTRUCTIONS
Code Explanation
A. 00 VAULT VIEWING OPTION
This option is either NOT SELECTED "OFF" or
SELECTED "ON."
A. 00 Not Selected "OFF."
A. SC Selected "ON."
• Press the COLORS/DELICATES button once to change
this selection. When selected, the money and/or
cycle counts will be viewable (if counter option(s) is
selected) when the coin box is removed.
• Press the PERM PRESS button once to advance to
next code.
b. 05 VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number
of nickels: 05 = $0.25.
• By pressing the COTTON/WHITES button, there is an
option of 1–199 nickels.
b. 30 With coin slide activation, this represents the total
vend price in nickels. Example: b. 30 is equal to $1.50.
• Press the PERM PRESS button once to advance to
next code.
C. 20 VALUE OF COIN 2
C. 20 This represents the value of coin 2 in number
of nickels: 20 = $1.00.
• By pressing the COTTON/WHITES button, there is an
option of 1–199 nickels.
C. 05 When a Gen 2 card reader is used, this code represents
the value of top off in nickels. C. 05 = $0.25.
• Press the PERM PRESS button once to advance to
next code.
d. 00 COIN SLIDE OPTION
This option is either Selected "ON" or Not Selected
"OFF." Coin slide use requires mounting of a coin slide
adapter plate into the metercase opening.
d. 00 Not Selected "OFF."
d. CS Selected "ON." Press the COLORS/DELICATES button
3 consecutive times for this selection.
When coin slide mode is selected, set "b." equal to
value of vend price in nickels. Set set-up code 6 xx
(regular cycle price) and set-up code 3.xx (special
cycle price) to number of slide operations. If the
installer sets up "CS" on a coin drop operated model,
it will not register coins.
• Press the PERM PRESS button once to advance to
next code.
E. 00 ADD COINS OPTION
NOTE: This option is only used with card reader or
coin drop. This option is either Selected "ON" or Not
Selected "OFF". This option causes the customer
display to show the number of coins (coin 1) to enter,
rather than the dollars-and-cents amount.
E. 00 Not Selected "OFF."
E. AC Selected "ON."
• Press the COLORS/DELICATES button
3 consecutive times to change this selection.
• In enhanced debit mode, this option is not
selectable.
• Press the PERM PRESS button once to advance to
next code.
30
Code Explanation
J. Cd PAYMENT MODE (COIN/DEBIT OPTION)
J. Cd Both coin and debit selected. Press the COLORS/
DELICATES button 3 consecutive times to change this
selection.
J. C_ Coins selected, debit disabled. Press the COLORS/
DELICATES button 3 consecutive times to change this
selection.
J. _d Debit Card selected, coin disabled. This selection must
be used for free vend. Press the COLORS/DELICATES
button 3 consecutive times to change this selection.
J. Ed Enhanced Debit is self-selected when a Generation 2
card reader is installed in the dryer. The "Ed" option
cannot be manually selected or deselected.
• Press the PERM PRESS button once to advance to
next code.
L. 00 PRICE SUPPRESSION OPTION
This option is either Selected "ON" or Not Selected
"OFF." This option causes the customer display to
show "ADD" or "AVAILABLE" rather than the amount
of money to add. (Used mainly in debit installations.)
L. 00 Not Selected "OFF."
L. PS Selected "ON."
• Press the COLORS/DELICATES button once to change
this selection.
• Press the PERM PRESS button once to advance to
next code.
n. CE CLEAR ESCROW OPTION
This option is either Selected "ON" or Not Selected
"OFF." When selected, money held in escrow for 30
minutes without further escrow or cycle activity will
be cleared.
n. 00 Not Selected "OFF."
n. CE Selected "ON."
• Press the COLORS/DELICATES button once to change
this selection.
• Press the PERM PRESS button once to advance to
next code.
U. 00 PENNY INCREMENT OFFSET
U. 00 This represents the penny increment price offset used
in Generation 2 (Enhanced Debit mode) card readers.
Choose from 0–4 pennies by pressing the COTTON/
WHITES button. This option does not apply to top off
feature.
• Press the PERM PRESS button once to advance to
next code.