SWITCHING PHOTO DETECTOR Remove both rear fan belt covers, then remove the motor cover assembly from both sides of the oven. The photo eye is located on the front side of the left motor bracket. Disconnect the three connecting wires, noting which color wires assemble to the associated wires on the photo-detector.
Certain safety code requirements exist for the installation of gas ovens; refer to the beginning of Section 2 for a list of the installation standards. In addition, because a the oven is equipped with casters, the gas line connection shall be made with a connector that complies with the Standard for Connec- tors for Movable Gas Appliances, ANSI Z21.69 (in U.S.A.), as...
III. QUICK REFERENCE: TROUBLESHOOTING Oven will not turn On. Oven will not heat. Oven is operating, but little or no air is coming from the fingers. Conveyor will not move.
Need help?
Do you have a question about the PS770G GAS and is the answer not in the manual?
Questions and answers