Using The Setup Wizard - D-Link DSL-G604T User Manual

Using the Setup Wizard

To use the Setup Wizard, click the Run Wizard button in the first browser window and follow the instructions
in the pop-up window that appears.
The first window summarizes the setup process. Click the Next button to proceed. You may stop using the Setup
Wizard at any time by clicking the Exit button. If you exit the wizard you will return to the first page without
saving any of the settings changed during the process.
Set a password that is required to make changes to the configuration settings of the Router in the Advanced
Configurations menus. Type in a password and verify it by typing a second time. Click Next to continue.
DSL-G604T Wireless ADSL Router User's Guide
The first window of the Setup Wizard lists the
basic steps in the process. These steps are as
follows:
1. Set your new system password.
2. Set the system time.
3. Configure the connection to the Internet.
4. Configure Wireless LAN settings.
5. Save the new configuration settings and
reboot the system.
24