Rear Panel Connections - D-Link DSL-G604T User Manual

Rear Panel Connections

All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the
Router. Use the Reset button to restore the settings to the factory default values in the next chapter for
instructions on using the reset button).
DSL-G604T Wireless ADSL Router User's Guide
Antenna
For wireless
operation, mount
the antenna on
the threaded
antenna post
Use the ADSL cable to connect to the
your telephone line (RJ-11 port)
Ethernet ports
Use the Ethernet ports to connect
the Router to your Ethernet LAN or
Ethernet devices
Reset button
To manually reset, depress
button with the power on for at
least seven seconds
Power Insert
Use the adapter shipped
with the Router to connect
to power source
Note
9
ADSL Port
To manually reboot the
Router, disconnect and
then reconnect the power.