Page 1
ELECTRODE SETTING INSTALLATION INSTALLATION & OPERATION INSTRUCTIONS INSTRUCTIONS Malaga 5/5E Storage Water Storage Water All gas appliances must be installed and/or commissioned t b i t ll d by persons registered with the Gas Safety Register (GB) Heater or the relevant national organisation.
Page 2
This symbol indicates that this appliance is not suitable for use in boats This symbol indicates that this appliance is not suitable for use in boats. CONTROL PANELS Note: Malaga 5 (Gas only) does not have the white wire or the +12V “B” connection. MALAGA 5/5E SWITCH PANEL CONNECTIONS MALAGA 5E...
Page 3
Width – 285mm Depth 520mm Depth – 520mm • • The Propex Malaga 5E is for use on both L P G and mains electricity The Propex Malaga 5E is for use on both L.P.G. and mains electricity. • Weight empty 9.3kg On initial operation or when the system has been drained, refill the system with •...
Page 4
PCB and press the red button on the manual reset overheat thermostat. reset overheat thermostat. Note: A cycling of the power supply to the unit will not clear a lockout. If problems persist contact Propex Heatsource Ltd on 023 8058 2555 - 4 - - 9 -...
Page 5
When installing a non return valve should be fitted if necessary. appliance installation instructions and should consider any relevant 1. WATER: The Malaga 5 is fitted with 12mm plain stems to which a suitable regulations in the country where the appliance is installed For this regulations in the country where the appliance is installed.
Page 6
This diagram is to be used for reference when carrying out any maintenance on the appliance. Note: “ELECTRIC ELEMENT & THERMOSTAT” is only present on Malaga 5E Malaga 5 will have a blanking plate in place of this Note: “ELECTRIC ELEMENT & THERMOSTAT” is only present on Malaga 5E. Malaga 5 will have a blanking plate in place of this.
Need help?
Do you have a question about the Malaga 5 and is the answer not in the manual?
Questions and answers