Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MicroNet EtherFast 100Mbps Fiber-Optic Adapter SP2515 SERIES
Summary of Contents for MicroNet EtherFast 100Mbps Fiber-Optic Adapter SP2515 SERIES
- Page 1 SP2515 SERIES EtherFast 100Mbps Fiber-Optic Adapter User’s Guide...
-
Page 2: Fcc Statement
FCC Statement This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to... -
Page 3: System Requirements
1. Introduction Congratulations on the purchasing of your new SP2515 series 100Mbps Fast Ethernet Fiber adapter. This document describes how to install and use the Fiber Ethernet Adapter. This Fiber Adapter allows options of different fiber connections, such as connector types and segment distance. To get the most out of this manual, you should have an understanding of Ethernet networking concepts. -
Page 4: Installation
2. Installation This section describes how to install the adapter. For connecting to the network, you must have the following: 1. Network adapter card installed to your computer. 2. Cabling (compatible with network topology) 3. Software for the adapter card contains both configuration utilities and drivers 2.1 Unpack and Inspect 2.1 Unpack and Inspect... - Page 5 5. Carefully insert the Fiber Adapter into the chosen slot and press firmly with proper push to ensure it is fully seated in the slot. 6. Secure the Fiber Adapter with the screw you saved in step 4. 7. Replace the PC cover. 8.
-
Page 6: Test Program
2. 2. 2. 2.6 6 6 6 Test Program Test Program Test Program Test Program This test program verifies configuration of the adapter and assists the isolation of any faults in operation. Test procedure are optional, and will only be useful in the unusual event that there is a fault, such as an interrupt number conflict among your computer’s add on cards, If your installation provides normal operation, you do not need these test procedures. -
Page 7: Specifications
<Cable Connection> test reminds you that the connection link might be fail, either the cable is not connected or the cable link fails. For the <Run Diagnostics on Network> test, it is necessary to connect your computer with its supporting hub or another computer. -
Page 8: Quick Installation Guide
Quick Installation Guide Please take the following steps for driver installation. Microsoft Windows 95/Windows 98 Microsoft Windows 95/Windows 98 Microsoft Windows 95/Windows 98 Microsoft Windows 95/Windows 98 1. Turn off the computer. 2. Insert the adapter into the available PCI slot. 3. - Page 9 Microsoft Windows 2000 Microsoft Windows 2000 Microsoft Windows 2000 Microsoft Windows 2000 1. Turn off the computer. 2. Insert the adapter into the available PCI slot. 3. Restart the computer. 4. After Microsoft Windows reboot, the 100Mbps Fast Ethernet Adapter will be found and the system will assign the default network driver to the adapter.
- Page 10 Note Note Note Note...
Need help?
Do you have a question about the EtherFast 100Mbps Fiber-Optic Adapter SP2515 SERIES and is the answer not in the manual?
Questions and answers