13.6 Setting The Cappuccino Programme - Electrolux ECG6600 Instruction Book

822_949_354 ECG6600-East_Elux.book Seite 129 Freitag, 1. Februar 2008 11:36 23
selected using the scrolling buttons "<"
or ">" (Figure6) in 10 steps.
When the bar is completely full, this
3
represents the max. cup filling quantity
of about 220 ml.
0 When the desired filling quantity is
displayed, confirm itwith the"OK" but-
ton (Figure 6). This filling quantity is
now programmed in.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
After programming the display auto-
3
matically jumps back to the menu
option for setting the filling quantity,
e.g. «ESPRESSO CUP».
0 To go back to the coffee mode, next
press the "MENU" button (Figure 5)
twice or wait about 120 seconds until
the appliance automatically jumps
back to coffee mode.
It is only possible to save the cup filling
3
quantity for 1 cup. When dispensing 2
cups the save quantity is doubled.
13.6 Setting the cappuccino
programme (programming the
quantity of milk and coffee)
The quantities of milk and coffee
required to make a cappuccino are pre-
set to normal levels at the factory. You
can adjust and change these to suit
your taste:
0 Press the "MENU" button (Figure 5).
The menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option
«CAPPUCCINO PROGRAM»
appears.
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows «MILK VOLUME».
0 If you want to change and save the
milk quantity used to make a cappuc-
cino, confirm the menu option with
the "OK" button (Figure 6).
0 A bar appears on the display, which can
be made bigger or smaller; this repre-
sents the milk quantity used to make a
cappuccino. If necessary a different
filling quantity can be selected using
the scrolling buttons "<" or ">"
(Figure 6) in 10 steps.
When the bar is completely filled, this
3
represents the max. milk quantity for
the cappuccino programme of about
120-180 ml (depending on the set
amount of froth, i.e. depending on the
amount of air mixed in).
0 When the desired filling quantity is
displayed, confirm itwith the"OK" but-
ton (Figure 6). This filling quantity is
now programmed in.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
3 The display automatically jumps back
to the menu option «MILK
VOLUME» after programming.
0 If you want to change and save the
coffee quantity used to make a cap-
puccino, press the scrolling buttons "<"
or ">" (Figure 5) untilthe menu option
«COFFEE FOR CAPPUCC.»
appears.
0 Confirm the menu option with the
"OK" button (Figure 6).
0 A bar appears on the display, which can
be made bigger or smaller; this repre-
sents the coffee quantity used to make
a cappuccino. If necessary a different
filling quantity can be selected using
the scrolling buttons "<" or ">"
(Figure 6) in 10 steps.
When the bar is completely full, this
3
represents the max. coffee quantity for
the cappuccino programme of about
220 ml.
0 When the desired filling quantity is
displayed, confirm itwith the"OK" but-
ton (Figure 6). This filling quantity is
now programmed in.
g
129