Summary of Contents for Micro-Tech INFORMER-MATE 81781
- Page 1 ENTERPRISES Informer-Mate Model 81781 Informer-Mate Deluxe Model 81791 User Manual 800-206-1045 0163-198-G...
- Page 2 FCC ID: HCQ 3B6UMXF Canada: 2309 101 597 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 3 Read these installation instructions thoroughly before using the Informer-Mate system. Failure to do so may result in injury or death to a person in your care. Test the Informer-Mate ™ the cords and sensor pads for signs of damage. Replace any components with signs of wear or damage immediately.
- Page 4 Description of the Micro-Tech Mate Series Monitoring Systems ™ Before installing this system, please read and follow these instructions carefully. Failure to do so could result in injury or death to a person in your care. No device is a substitute for proper nursing care. The Micro-Tech Informer-Mate ®...
-
Page 5: Battery Installation
2-Button Reset Figure 1 Battery Compartment Alarm tone selector (81791 only) Alarm Mode Switch Settings Volume Setting High Nurse Call *If the Informer-Mate ™ Model 81781 is set to Nurse call the monitor defaults to Low setting. ™ **If the Informer-Mate Deluxe Model 81791monitor is set to Nurse Call and the nurse station is not connected the monitor defaults to local alarm. - Page 6 Installing the Informer-Mate Keep the sensor pad flat at all times. Folding the pad may damage it. Do not use the pad if it has been folded. Check for proper operation of the Informer-Mate mattress type used. Above the mattress set-up 1.
- Page 7 3. Route the sensor pad cable from the sensor pad to the control unit. The cable will need to run from the top of the mattress to the underside of the bed and up the headboard, footboard, or rail of the bed (Figure 4).
- Page 8 nstalling the Informer-Mate Chair setup 1. Place the chair sensor pad on the seat portion of the chair (Figure 6). An additional cushion may be used on top of the pad for patient or resident comfort. If you use an additional cushion, test the system by pressing firmly on the top of both cushions.
-
Page 9: Maintenance
Maintenance To keep your Informer-Mate • Do not immerse the control unit in liquid of any type. The control unit will not operate properly if exposed to excessive liquids. If the control unit is immersed in liquid, discard it immediately. •... -
Page 10: Warranty And Disclaimer
Warranty and Disclaimer WARRANTY AND DISCLAIMER: Micro-Tech ® products are warranted to be free of manufacturing defects for a period of one year from the date of purchase. If any defects covered by this Warranty appear within the above stated one year period, Micro-Tech will, at its option, repair or replace the defective component on an exchange basis with new or rebuilt parts at its expense, without charge for parts or labor upon delivery of such product to Micro-Tech at Buyer’s expense. -
Page 11: Accessory & Replacement Items
Micro-Tech Accessory & Replacement Items ® MONITORS 81781 Informer-Mate 81791 Informer-Mate alarm and is nurse call system compatible) SENSOR PAD - BED 82700 30-day warranty 82708 90-day warranty 82710 1-year warranty 82715 Dark blue durable nylon cover with 1-year warranty SENSOR PAD - CHAIR or WHEELCHAIR 83700 1-year warranty...
Need help?
Do you have a question about the INFORMER-MATE 81781 and is the answer not in the manual?
Questions and answers