Install Crank handle for high pressure hose reel ....6 Fit clamp for high-pressure jet tube ........6 Fill up detergent tank ............6 Fill up tank for Nilfisk-ALTO AntiStone ........6 Antiscale ................7 Fill up fuel tank ..............7 Connecting the high pressure hose ........7 3.10 Connecting the water supply ..........8 3.11 Electrical connection ............8...
Nilfisk-ALTO. The use of sure cleaner be connected via a other cleaning chemicals residual current circuit breaker. For transport at temperatures...
Page 5
NEPTUNE 4 FA area. Before putting the high- ate it in inadequately ventilated Cable length Cross section pressure cleaner into service, rooms! < 16 A > 25 A carry out a visual check of all the Store the cleaner where up to 20 m ø1.5mm²...
NEPTUNE 4 FA Danger for persons, risk of larly serviced by authorized Nil- must be carried out. Our after- fisk-ALTO dealers in accordance sales service technicians are overheating and fire. with the maintenace plan. Failure at your disposal as authorised to do so will void the warranty.
7 Top cover release 18 Supply water connection 8 Crank handle for 19 Tank filler for anti-freeze High pressure hose 20 Tank filler for Nilfisk-ALTO reel AntiStone (Neptune..X) 9 High pressure hose 21 Canister for detergent connection for machines...
1. Fill up detergent tank with prediluted detergent. Capacity see chapter 9.4 Tech- nical Data Fill up tank for Nilfisk- 1. Fill up Nilfisk-ALTO Anti- ALTO AntiStone Stone/water softener reser- voir with the sample bottle provided. Nilfisk-ALTO Anti- Stone prevents any deposits of scale and acts at the same time as a corrosion inhibitor.
(paraffin precip- than 6 months is not allowed itation). This can lead to difficulties to be filled into Nilfisk-ALTO in starting the burner. Before the high pressure cleaners. Diesel With the machine cold:...
NEPTUNE 4 FA 1. Rinse the water supply hose 3.10 Connecting the water supply briefly in order to prevent sand an other dirt particles entering into the machine. 2. Connect water supply hose to the machine. 3. Open water tap.
NEPTUNE 4 FA 4 Control / Operation Connections 1. Pull the blue quick-release 4.1.1 Connecting the spray grip (A) of the spray gun lance to the spray gun backwards. 2. Insert the nipple of the spray lance (B) into the quick- release connection and re- lease it.
NEPTUNE 4 FA Pressure regulation 1. Turn the twist grip on the spray (Tornado Lance) unit: – High pressure = clockwise (+) for high pres- sure – Low pressure = anticlockwise (–) for low pres- sure. Pressure regulation 1. Turn the twist grip on the spray...
NEPTUNE 4 FA Encrusted or thick layers of dirt can be loosened or softened up by a 5.1.1 Soaking period of soaking. This is for example an ideal method within agricul- ture – for example, within pig sties. The ideal soaking method can be achieved via use of foam or simple alkaline detergent.
Page 14
NEPTUNE 4 FA 5.2.2 Vehicle Task Accessories Method Vehicle bodywork Standard lance 1. Apply detergent to vehicle or equipment surfaces in Detergent injection order to soften up dirt and grime. Apply from bottom Curved lances and un- to top. In cases of particularly dirty vehicles, pre-spray...
NEPTUNE 4 FA 6 After using the cleaner Switching off the 1. Turn the main switch to posi- cleaner tion „OFF“. 2. Close water tap. 3. Squeeze the spray gun han- dle until the cleaner is de- pressurised. 4. Lock the safety catch on the spray gun.
NEPTUNE 4 FA 7 Maintenance Maintenance plan Every six After the first 50 months or Weekly operating hours 500 operating required hours 7.2.1 Water filters 7.2.2 Fuel filter 7.2.3 Checking the pump oil quality 7.2.4 Changing the pump oil 7.2.5 Emptying the fuel oil tank 7.2.6 Flame Sensor...
Page 17
NEPTUNE 4 FA 7.2.3 Checking the pump oil 1. Check colour of pump oil. quality If the oil has a grey or white shade, change the oil (see chapter 7.2.4) 2. Top up cold pump with fresh oil if necessary.
> Constant light > Top up fuel - Fuel shortage > Cold water operation is possible > Flashing light > Top up Nilfisk-ALTO AntiStone - Nifisk-ALTO AntiStone short- > Constant light > Contact Nilfisk-ALTO Service - Service interval has expired >...
NEPTUNE 4 FA > Flashing light (alternately) > • Turn main switch in position - Motor overheated “OFF“, let the machine cool down • Remove/disconnect exten- sion cable • Possible phase failure; have electrical connection checked > - Machine overheated >...
NEPTUNE 4 FA Guarantee general conditions Machines being misused. business are applicable with Machines being repaired or regard to the guarantee. tampered with by unauthor- Unauthorised modifications ized person(s). to the appliance, the use of The use of parts other than...
NEPTUNE 4 FA Technical Data NEPTUNE 4 4-25 4-28 4-39 4-43 4-43 4-44 4-44 4-50 FA / 4-50 FA / 4-55 FA / 4-55 FA / 4-36 Descr. 4-50 FA 4-50 FAX 4-50 FAX 4-55 FAX 4-55 FAX Voltage 200 V / 3~ / 50Hz...
Page 22
HEAD QUARTER HOLLAND PORTUGAL DENMARK Nilfi sk-Advance B.V. Nilfi sk-Advance, Lda. Nilfi sk-Advance A/S Versterkerstraat 5 Sintra Business Park Sognevej 25 1322 AN ALMERE Zona Industrial Da Abrunheira DK-2605 Brøndby www.nilfi sk.nl Edifi cio 1, 1o A Tel.: (+45) 4323 8100 Sintra, P-2710-089 www.nilfi...