Panasonic SC-HT730 Operating Instructions Manual page 33

Dvd home theater sound system
Hide thumbs Also See for SC-HT730:
Table of Contents

Advertisement

Picture abnormal or un-viewable
Picture distorted.
Picture size doesn't fit the
screen.
Menu is not displayed correctly.
Auto zoom function does not
work well.
The picture on the television
disappears or stripes appear on
the screen.
Progressive video
There is ghosting when
progressive output is on.
Pictures not in progressive
output.
Closed captions not displayed.
Listening to the radio
Noise is heard.
"ST" flickers or doesn't light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
Television operation
Cannot operate the TV.
Unit displays
The display is dark.
"NOPLAY"
"NODISC"
"F61"
"DVD U11"
"ERROR"
"DVD H∑∑"
∑∑ stands for a number.
"[W]" is flashing.
(When using optional SH-FX50)
"W01" is flashing.
(When using optional SH-FX50)
Television displays
"/"
"Cannot display group xx,
content xx"
"This disc may not be played in
your region"
No on-screen display.
≥Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
≥Change "TV Aspect" in the "Video" tab.
≥Change the Zoom setting.
≥Restore the zoom ratio to a1.00.
≥Set "Subtitle Position" in Display Menu to "0".
≥Turn off TV's zoom function.
≥Use the other preset aspect ratios or manual adjustment.
≥Zoom function may not work well, especially in dark scenes and may not work depending on the
type of disc.
≥Mobile telephone chargers can cause some disturbance.
≥If you are using a TV indoor antenna, change to an outdoor antenna.
≥The television antenna wire is too close to the unit. Separate the antenna wire of the television
from the unit.
≥This problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlace output. Change "Video Output Mode" in Picture Menu to "480i".
≥Press [PROGRESSIVE] on the main unit so "PRG" is displayed. Or select "480p" in "Video
Output Mode" in Picture Menu.
≥If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT terminal, output
will be interlace even if "PRG" is displayed.
≥When progressive output is on, closed captions will not be displayed.
≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.
≥Turn the television off or move it away from the unit.
≥Separate the antenna from other cables.
≥Press [TV] first to operate the television.
≥Check the remote control code for the TV manufacturer.
≥Select "Bright" in "FL Dimmer" in the "Others" tab.
≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank disc.
≥You haven't inserted a disc; insert one.
≥You haven't inserted the disc correctly; insert it correctly.
≥Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
≥Disc is dirty. Wipe it clean.
≥Incorrect operation performed. Read the instructions and try again.
≥Trouble may have occurred. The number following "H" depends on the status of the unit. Turn the
unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC power supply
cord, and then reconnect it.
≥If the service numbers fail to clear, note the service number and contact a qualified service person.
≥There is no link between the main unit and the receiver. Check that the receiver is turned on.
≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥Re-initialize the main unit: While stopped and "DVD/CD" is the source, press and hold [∫] on the
main unit and [S10] on the remote control until "Initialized" disappears from the television. Turn
the unit off and on again. If the problem persists, contact a qualified service person.
≥The operation is prohibited by the unit or disc.
≥You are trying to display incompatible contents.
≥You can only play DVD-Video if their region number is the same or includes the same region
number as the unit or if the DVD-Video is marked "ALL". Confirm the region number for the unit
on the rear panel.
≥Select "On" in "On-Screen Messages" in the "Display" tab.
Page
7
22
15
15
21
15
21
12,
21
7
25
29
23
11
12
4, 5,
7
11
Cover
page
23
RQT7972
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-ht930Sc-ht733

Table of Contents