To Disconnect The Bluetooth Device From; Hi-Fi Component; To Disconnect Hi-Fi Component From; The Bluetooth Device - Samsung MX-FS9000 User Manual

• If the Bluetooth device has failed pair with the
Component, delete the previous "[Samsung] HI-FI
XXXXXX" found by the Bluetooth device and make it
search for the component again.
Play music on the connected device.
5.
• You can listen to the music playing on the connected
Bluetooth device over the Hi-Fi Component system.
• In mode, some model's Play/Repeat/Stop/
Bluetooth
Next/Back functions are not available.
➣
The product only supports Middle Quality SBC data (up
to 237kbps@48kHz), and does not support High Quality
SBC data (328kbps@44.1kHz).
• The AVRCP feature is not supported.
• Connect only to a Bluetooth device that supports the
A2DP (AV) function.
• You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
• Only one Bluetooth device can be paired at a time.
• Once you have turned off Hi-Fi Component and the
pairing is disconnected, the pairing will not be restored
automatically. To reconnect, you must pair the device
again.
• Search or connection may not be performed properly
by Hi-Fi Component in the following cases.
- If there is a strong electrical field around Hi-Fi
Component.
- If several Bluetooth devices are simultaneously paired
with Hi-Fi Component.
- If the Bluetooth device is turned off, not in place, or
malfunctions.
- Note that such devices as microwave ovens, wireless
LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
which can cause electric interference.

To disconnect the Bluetooth device from

Hi-Fi Component

You can disconnect the Bluetooth device from Hi-
Fi Component. For instructions, see the Bluetooth
device's user manual.
• Hi-Fi Component will be disconnected.
• When Hi-Fi Component is disconnected from the Bluetooth
device, Hi-Fi Component will display DISCONNECTED ➞
READY on the front display.

To disconnect Hi-Fi Component from

the Bluetooth device

Press the CD/Bluetooth button on the front panel
of Hi-Fi Component to switch from Bluetooth mode
to another mode or turn off Hi-Fi Component.
• The connected Bluetooth device will wait a certain time for
a response from Hi-Fi Component before terminating the
connection.(Disconnection time may differ, depending on
the Bluetooth device)
• The currently connected device will be disconnected.
➣
In Bluetooth connection mode, the Bluetooth connection
will be lost if the distance between the Hi-Fi Component
and the Bluetooth device exceeds (5 meters).
• If the Bluetooth device comes back into the effective
range and then again connect after disconnecting, you
can restart to restore the pairing with the Bluetooth
device.
• Hi-Fi Component automatically turns off after 25
minutes in the Ready state.

Using My Karaoke

You can use MY Karaoke function to sing along
with your favorite CDs and USB.
1. Connect the microphone to the MIC jack on the front
of the product.
If your microphone jack is larger than 3.5 (ø) MIC
`
jack, you need a Connector-Adaptor(optional) to
complete the connection.
First, connect the Connector-Adaptor to the MIC jack on
`
the front of the product,
Second, connect the microphone (with larger jack) to
`
the Connector-Adaptor.
2. Press the MIC VOL-, + button on the remote
control to adjust the volume of the microphone.
3. Press the MY KARAOKE button on the remote
control to suppress the vocal if you need. Each time
the button is pressed, the selection is changed as
follows:
MY KARAOKE ON ➞ MY KARAOKE OFF
If you hear strange noises (squealing or howling)
`
while using the Karaoke feature, move the
microphone away from the speakers. Turning down
the microphone's volume or the speaker volume is
also effective. Do not set the MICROPHONE towards
the SPEAKER.
The microphone does not operate in the AUX and
`
TUNER mode.
` If you connect with the Microphone, GIGA SOUND
will automatically turn off. Even if you remove the
microphone, it will not turn on.
Basic functions
13
English