LG -600 Service Manual

Gsm phone
Hide thumbs Also See for LG-600:

Advertisement

Quick Links

GSM Phone
SERVICE MANUAL
MODEL : LG-600

Advertisement

Table of Contents
loading

Summary of Contents for LG LG-600

  • Page 1 GSM Phone SERVICE MANUAL MODEL : LG-600...
  • Page 3: Table Of Contents

    Table Of Contents 5.2.5 LCD Trouble ......26 1. Introduction ........5.2.6 Charge Trouble ......27 2. Specification & Feature ..5.2.7 Vibrator is not working ..... 28 5.2.8 Backlight is not Working ..29 2.1 Product Name ........2 5.2.9 TX POWER Trouble(E-GSM) ..
  • Page 4: Introduction

    1. Introduction 1. Introduction LG-600 is a folder type mobile phone operated in the GSM Digital Cellular Mobile Radio System, which is the Pan-European mobile cellular standard. LG-600 has the operation band of GSM 900 and DCS 1900. GSM Phase II features are fully supported and parts of the GSM Phase II+ features are also supported.
  • Page 5: Main Features

    2. Specification & Feature 2.4 Main Features Category Feature Comments Language English and other languages are under this category. SIM Toolkit Class 2 Pre-paid SIM Applied Operation Text Input(eZi Text) Language All available languages 2 languages per market Predictive word input Phone Book 1 Phone Numbers for 1 Name 500 Phone Numbers...
  • Page 6: Hw Features

    Standard : Li-ion, 600mAh Standard : 6.7 X 35.8 X 50 Extended : Li-ion, 1050 mAh (16g) (Option, LG Chemical Ltd.) Extended : 11 X 43.1 X 66.7 28.1 X 44 X 80 (30g) 2. Packing Type Standard : Soft Pack...
  • Page 7 2. Specification & Feature Category Feature Comments Memory Flash : 4Mbytes SRAM : 512Kbytes Speech coding FR, EFR, HR Data & Fax Built-in Vibrator Built-in Type : Coin Buzzer Applied Voice Dialing Up to 20 names Voice Recording Up to 180 seconds C- MIC Built-in Receiver...
  • Page 8: Sw Features

    2.6 SW Features Function Detail Item Comments Display Main LCD/Front LCD 128 x 90 / 96 x 12(mm) Backlight LCD, Keypad Icons Soft Icons / Fixed Icons Fonts Variable 8x8, 8x12, 10x16 Screen Display RSSI, Battery Status, Clock Incoming/outgoing Call Menu Access and operation Language Options English and other languages are under this...
  • Page 9 2. Specification & Feature Function Detail Item Comments Speed Dialing Last Number Redial Multi-party Call Yes(network dependent) Voice Recording in call Voice Dialing Number of Voice Dial Max 20 Phone Book Voice Tag Time 1.6 second Network Network Selection Automatic/ Manual Network List Display DTMF DTMF Signaling...
  • Page 10 Function Detail Item Comments Supplementary Call Forwarding All Incoming Calls On Busy No Reply Not-reachable Call Barring All Outgoing Calls Outgoing International Calls Outgoing International Calls except to Home Country All incoming Calls Incoming Calls when roaming Plug-In Type Service Provider Lock & Network Lock Auto Detection 3V &...
  • Page 11 2. Specification & Feature Function Detail Item Comments Scheduler View Day Make Schedule Call Memo Anniversary Delete View All WAP1.1 AUR Browser World Time Setting Local Time Number of Selectable Cities 24 Cities Calculator Operator Addition Subtraction Multiplication Division Unit Converter Length Conversion Weight Conversion Volumes Conversion...
  • Page 12: Keypad Arrangement & Functions

    3. Keypad Arrangement & Functions 3.1 Keypad Arrangement 3.1.1 Front of the phone 1 Front LCD Screen 2 Hard Icons 3 Call Indicator Light 4 Antenna 1 Earpiece 2 Active Folder 3 Display Screen 4 Soft Left Key 5 Record Key 6 Confirm Key 7 Send Key 8 Up/Down Side Key...
  • Page 13: Functions Of Keys

    3. Keypad Arrangement & Functions 3.2 Functions of Keys The following shows key components of the phone. Description Soft Left Key / Soft Right Key Each of these keys performs the function indicated by the text on the display immediately above it. WAP Hotkey You can directly connect to WAP by pressing this key.
  • Page 14: Disassembly/Reassembly

    4. Disassembly/Reassembly Upper Case Lower Case 4.1 Disassembly 4.1.1 Disassembly of Upper Case/Lower Case 1. Push the battery locker, and then remove the battery cover. 2. Pull the battery downward and lift it up. 3. Use your thumb to pull down the battery-locker hard. Battery Cover Figure 4-1.
  • Page 15: Disassembly Of Lower-Case Components

    4. Disassembly/Reassembly 4. Loosen the 4 screws as shown below. 5. Turn over the phone facing up and detach lower case carefully from the hooks on the top of upper case. Figure 4-2. Disassembling of Upper and Lower Case 4.1.2 Disassembly of Lower-Case Components 1.
  • Page 16 3. Use a small ‘-’ type driver to push away a pin from the hinge. 4. Hold the display case and pull out the right hinge first and then left one. Figure 4-4. Removing the display case 5. Use a pin to lift up the microphone to the direction as shown in fig. 4-5. Figure 4-5.
  • Page 17: Assembly Of Lower Case

    4. Disassembly/Reassembly 4.1.3 Assembly of Lower Case 1. When assembling the display case to the lower case, make sure only circuit board, pin and a side of the display cases are assembled first as shown below. 2. Insert left side first when assembling hinges. 3.
  • Page 18: Disassembly Of Pcb

    4.1.4 Disassembly of PCB 1. PCB is easily detached from the upper case by hand. Assembly: - When placing Backup-battery onto Battery-hold, make sure the battery poles are facing the right direction. Figure 4-7. Placing Backup-battery 2. Use a '-'type driver to push away the antenna hook, and while pushing the hook, turn and pull out the antenna from the case.
  • Page 19: Data Kit & Test Method

    In order to download software of LG-600, the following working environments should be prepared: LG-600 Data Link Kit, DK-10G that is connected to COM1 or COM2 serial port in the Desktop or Notebook PC. LG-600 Data Kit Download Monitor Program that is copied to Desktop PC or Notebook PC.
  • Page 20: Download Procedure

    I Download Procedure 1. Unzip LG-600 UART Download monitor program (monitor632.zip) in PC. 2. Execute monitor632.exe. And then select the "Target" Menu shown in Fig1. Then, choose "Connect" in the Target Menu. <Figure 1> 3. A table will be displayed as shown in Fig 2. Then press the arrow-button and choose a correct serial port.
  • Page 21 5. Data Kit & Test Method 4. As the following window shown in Fig 3 is displayed, connect LG-600 Phone to Data Link Kit, DK-10G and power on LG-600. If the connection is succeeded, the following screen will show the contents as shown in Fig 4.
  • Page 22 5. Click on "Flash" on the top menu and select "Erase and Program Appli Only" item as shown in Fig 5. <Figure 5> 6. Finally choose the target SW that you want to download. And then you can see the following window in Fig 6.
  • Page 23: Test Equipment

    5. Data Kit & Test Method 7. If the downloading procedure is succeeded, then the following window is shown. <Figure 7> 5.1.3 Test Equipment 1. Power Supply 2. HP8922 3. Spectrum Analyzer 4. Oscilloscope 5.1.4 Test Equipment Setup - 21 -...
  • Page 24: Test Method

    5.2 Test Method 5.2.1 Power-On Trouble Power-on button is not working Check the voltage level of battery The level is higher than 3.32V Check the level of TP515 Charge the battery / (ON/OFF) Check the battery The level is high(3V) Power-on sequence is not executed properly.
  • Page 25: Mic Trouble

    5. Data Kit & Test Method 5.2.2 MIC Trouble MIC is not working Connect the Phone to Network Analyzer Check the signal level at the point U501, (F610 = MIC_bias) The level is 2.5V Check the signal level at the Check the connectivity of U900, PIN 5,6 and U901, P5,6 F610 and R614, R616.
  • Page 26: Receiver Trouble

    5.2.3 RECEIVER Trouble Receiver is not working Connect the Phone to Network Analyzer Check the signal level at the F605, F606 while putting audio signal in MIC A few hundreds of mV of signal levels are measured Check the connectivity Check the receiver of Receiver component.
  • Page 27: Melody Trouble

    5. Data Kit & Test Method 5.2.4 Melody Trouble Melody is not heard Check the connectivity of buzzer. The connection is OK Connect the buzzer to Check the level of R611,Q602 the phone properly Check whether the melody signal is out from the collector of Q602 Replace the Q602 - 25 -...
  • Page 28: Lcd Trouble

    5.2.5 LCD Trouble • U605 : LDC Component LCD Display is not Working Normal state Reassemble LCD module contact of LCD module with with LCD connector LCD connector on PCB. LCD Connector LCD connector is Re-Soldering well soldered onto The LCD Driver Replace the U305 source voltage is 3V (U305:PIN5)
  • Page 29: Charge Trouble

    5. Data Kit & Test Method 5.2.6 Charge Trouble START Charging is not working. Case 1 Case 2 The Battery The Q600 Pack is well Contact to Voltage is between the phone. 0.65~0.9V Reassemble Replace the Q600 Battery Pack The Battery Voltage is between The D601 3.2V~4.2V...
  • Page 30: Vibrator Is Not Working

    5.2.7 Vibrator is not working NOTE : To get to the Test mode, press 2945 ¡ #, then hold down * key. START In the Test mode, select ‘Baseband Test’ then select ‘Vibrator Mode’ Signal level is high, Replace the R610 R610 Q601 Collector Voltage Level is High...
  • Page 31: Backlight Is Not Working

    5. Data Kit & Test Method 5.2.8 Backlight is not Working NOTE : To get to the Test mode, press 2945 © #, then hold down * key. START In the Test mode, select ‘Baseband Test’ then LED Test then Backlight ON/OFF Defected Key Defected LCD...
  • Page 32: Tx Power Trouble(E-Gsm)

    5.2.9 TX POWER Trouble(E-GSM) START ✔ HP8960 : Test mode 62CH, 7level setting ( TCH ) 62CH, -60dBm setting ( BCCH ) ✔ Spectrum analyzer setting ✔ Oscilloscope setting VC-TCXO U212 pin 3 13MHz ✔ U212 soldering check Oscillation check ✔...
  • Page 33 5. Data Kit & Test Method ✔ U208 soldering check ✔ U208 pin 5 DC 2.8V check TX VCO ✔ U208 pin 3 control signal check U208 pin 6 ( >= 1Vp-p ) ✔ U208 pin 4 Low Voltage check Frequency &...
  • Page 34: Tx Power Trouble(Dcs)

    5.2.10 TX Power Trouble(DCS) START ✔ HP8960 : Test mode 700CH, 2level setting ( TCH ) 700CH, -60dBm setting ( BCCH ) ✔ Spectrum analyzer setting ✔ Oscilloscope setting VC-TCXO U212 pin 3 13MHz ✔ U212 soldering check Oscillation check ✔...
  • Page 35 5. Data Kit & Test Method ✔ U208 soldering check ✔ U208 pin 5 DC 2.8V check TX VCO ✔ U208 pin 3 control signal check U208 pin 10 ( >= 1Vp-p ) ✔ U208 4 Low Voltage check Frequency & Power check ✔...
  • Page 36: Rx Sensitivity Trouble (E-Gsm)

    5.2.11 RX Sensitivity Trouble (E-GSM) START ✔ HP8960 : Test mode 62CH, 7level setting ( TCH ) 62CH, -60dBm setting ( BCCH ) ✔ Spectrum analyzer setting ✔ Oscilloscope setting RF Connector U107 pin 1 ✔ U107 soldering check ✔ Short check Frequency &...
  • Page 37 5. Data Kit & Test Method GSM RF SAW 2nd FILTER U204 pin 4 or 6 ✔ U204 soldering check Frequency & Power check ✔ U204 change another same one Frequency = 947.4MHz & Power >= -68dBm ✔ U212 soldering check VC-TCXO ✔...
  • Page 38 RF MAIN CHIP U203 pin 48,1,3,4 U200 soldering check U200 chip check I/Q signal check Ulysse-Nausica check I/Q signal >= DC 0.9V & 0.3Vp-p REMARKS 1. Call connection : TEM3 execution Enter tms1 Enter txpw 1 7 Enter rfe 7 Enter 2.
  • Page 39: Rx Sensitivity Trouble(Dcs)

    5. Data Kit & Test Method 5.2.12 Rx Sensitivity Trouble(DCS) START ✔ HP8960 : Test mode 700CH, 7level setting ( TCH ) 700CH, -60dBm setting ( BCCH ) ✔ Spectrum analyzer setting ✔ Oscilloscope setting RF Connector ✔ U107 soldering check U107 pin 1 ✔...
  • Page 40 DCS RF 2nd SAW FILTER U201 pin 5 ✔ U201 soldering check Frequency & Power check Frequency = 1842.8MHz & ✔ U201 change another same one Power >= -60dBm ✔ U212 soldering check VC-TCXO ✔ U212 pin 4 DC 2.8V + -5% check U212 pin 3 13MHz ✔...
  • Page 41 5. Data Kit & Test Method RF MAIN CHIP U200 soldering check U203 pin 48,1,3,4 U200 chip check I/Q signal check Ulysse-Nausica check I/Q signal >= DC 0.9V & 0.3Vp-p REMARKS 1. Call connection : TEM3 execution Enter tms1 Enter txpw 1 102 Enter rfpw 1 700 Enter rfpw 1 700 Enter...
  • Page 42: Pcb Diagram & Testpoint Description

    6. PCB Diagram & Testpoint Description LG-600 KEY BOARD LAYER 1 - 40 -...
  • Page 43 6. PCB Diagram & Testpoint Description LG-600 KEY BOARD LAYER 4 - 41 -...
  • Page 44 LG-600 MAIN BOARD LAYER 1 - 42 -...
  • Page 45 6. PCB Diagram & Testpoint Description LG-600 MAIN BOARD LAYER 8 - 43 -...
  • Page 46 - 44 -...
  • Page 47: Block Diagram

    7. Block Diagram 7. Block Diagram 7.1 BB Block Diagram - 45 -...
  • Page 48: Rf Block Diagram

    7.2 RF Block Diagram - 46 -...
  • Page 49: Schematic Diagram

    8. Schematic Diagram 8. Schematic Diagram 8.1 Key Pad (LCD Interface & Earphone) - 47 -...
  • Page 50: (Lcd Interface & Earphone)

    8.2 Main Board 8.2.1 Baseband(Ulysse & Omega) - 48 -...
  • Page 51: Memory Devices

    8. Schematic Diagram 8.2.2 Memory Devices - 49 -...
  • Page 52: Audio & Peripheral Circuit

    8.2.3 Audio & Peripheral Circuit - 50 -...
  • Page 53: B Connector Interface

    8. Schematic Diagram 8.2.4 I/O & B’ to B Connector Interface - 51 -...
  • Page 54: Rf Top Schematic

    8.3 RF Top Schematic 8.3.1 RF Front End - 52 -...
  • Page 55: Rf Main

    8. Schematic Diagram 8.3.2 RF Main - 53 -...
  • Page 56 - 54 -...
  • Page 57: Exploded View

    MTAD0000301 TAPE,WINDOW (FRONT) MLEA0000202 LOCKER,BATTERY:LG-600 EUADG MWAZ0000101 WINDOW (LOWER) MLEA0000203 LOCKER,BATTERY:LG-600 EUABB MHFD0000201 HINGE,FOLDER MSDC0000101 SPRING,LOCKER MCCC0000301 CAP,EARPHONE JACK:LG-600 EUSSV SNGF0000401 ANTENNA,GSM,FIXED MCCC0000302 CAP,EARPHONE JACK:LG-600 EUADG MCJA0001601 COVER,BATTERY:LG-600 EUSSV MCCC0000303 CAP,EARPHONE JACK:LG-600 EUABB MCJA0001602 COVER,BATTERY:LG-600 EUADG ABGB0000101 BUTTON ASSY,FUNCTION (REC)
  • Page 58: Replacement Parts List

    10. Replacement Parts list LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK TGFF0000101 GSM(FOLDER) LG-600 EUSSV TGFF0000102 GSM(FOLDER) LG-600 EUADG TGFF0000103 GSM(FOLDER) LG-600 EUABB AHAZ00 AHAZ0000301 HANDSET ASSY LG-600 EUSSV AHAZ00 AHAZ0000302 HANDSET ASSY LG-600 EUADG AHAZ00 AHAZ0000303 HANDSET ASSY...
  • Page 59 10. Replacement Parts list LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK MLEA00 MLEA0000201 LOCKER,BATTERY LG-600 EUSSV MLEA00 MLEA0000202 LOCKER,BATTERY LG-600 EUADG MLEA00 MLEA0000203 LOCKER,BATTERY LG-600 EUABB MSDC00 MSDC0000101 SPRING,LOCKER MSDD00 MSDD0001001 SPRING,PLATE ADCA00 ADCA0000201 DOME ASSY,METAL AWAZ00 AWAZ0000201 WINDOW ASSY...
  • Page 60 LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK C932 ECCH0002901 CAP,CERAMIC,CHIP 15 pF,50V ,J ,B ,TC ,1005 ,R/TP C934 ECCH0000215 CAP,CERAMIC,CHIP 15 pF,50V,J,NP0,TC,1608,R/TP C935 ECCH0000112 CAP,CERAMIC,CHIP 15 pF,50V,J,NP0,TC,1005,R/TP C936 ECCH0000155 CAP,CERAMIC,CHIP 10 nF,16V,K,X7R,HD,1005,R/TP C937 ECCH0000155 CAP,CERAMIC,CHIP 10 nF,16V,K,X7R,HD,1005,R/TP C939 ECZH0002909 CAP,CHIP,MAKER 9 pF,50V ,D ,NP0 ,TC ,1005 ,R/TP C940...
  • Page 61 10. Replacement Parts list LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK SFBH0002101 FILTER,BEAD,CHIP 1000 ohm,1608 ,CHIP FERRITE BEAD BLM11 FOR GHz FREQUENCY RANGE SFBH0002101 FILTER,BEAD,CHIP 1000 ohm,1608 ,CHIP FERRITE BEAD BLM11 FOR GHz FREQUENCY RANGE SFBH0002101 FILTER,BEAD,CHIP 1000 ohm,1608 ,CHIP FERRITE BEAD BLM11 FOR GHz FREQUENCY RANGE SFBH0002101 FILTER,BEAD,CHIP...
  • Page 62 LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK ERVZ0000201 RES,VARIABLE,ETC ohm, PIN, ,SMD ,R/TP ,1608 CHIP VARISTOR ERVZ0000201 RES,VARIABLE,ETC ohm, PIN, ,SMD ,R/TP ,1608 CHIP VARISTOR ERVZ0000201 RES,VARIABLE,ETC ohm, PIN, ,SMD ,R/TP ,1608 CHIP VARISTOR ERVZ0000201 RES,VARIABLE,ETC ohm, PIN, ,SMD ,R/TP ,1608 CHIP VARISTOR ERVZ0000201 RES,VARIABLE,ETC ohm, PIN, ,SMD ,R/TP ,1608 CHIP VARISTOR...
  • Page 63 10. Replacement Parts list LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK C213 ECCH0000342 CAP,CERAMIC,CHIP 820 pF,50V,J,NP0,TC,2012,R/TP C214 ECCH0000128 CAP,CERAMIC,CHIP 100 pF,50V,J,NP0,TC,1005,R/TP C215 ECZH0003108 CAP,CHIP,MAKER 220 pF,50V ,K ,X7R ,HD ,1005 ,R/TP C216 ECCH0000183 CAP,CERAMIC,CHIP 1.8 pF,50V ,C ,NP0 ,TC ,1005 ,R/TP C217 ECCH0000117 CAP,CERAMIC,CHIP...
  • Page 64 LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK C264 ECCH0000155 CAP,CERAMIC,CHIP 10 nF,16V,K,X7R,HD,1005,R/TP C265 99999999999 NOT ASSEMBLE NOT ASSEMBLE C266 99999999999 NOT ASSEMBLE NOT ASSEMBLE C267 ECCH0000104 CAP,CERAMIC,CHIP 3 pF,50V,C,NP0,TC,1005,R/TP C268 ECCH0000901 CAP,CERAMIC,CHIP 2.2 pF,50V ,C ,NP0 ,TC ,1005 ,R/TP C300 ECTZ0002601 CAP,TANTAL,CHIP,MAKER...
  • Page 65 10. Replacement Parts list LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK C616 ECTZ0002701 CAP,TANTAL,CHIP,MAKER 100 uF,6.3V ,M ,STD ,ETC ,R/TP C617 ECCH0000168 CAP,CERAMIC,CHIP 0.1 uF,16V,Z,Y5V,HD,1005,R/TP C618 ECCH0000187 CAP,CERAMIC,CHIP 150 pF,50V ,J ,NP0 ,TC ,1005 ,R/TP C624 ECZH0002909 CAP,CHIP,MAKER 9 pF,50V ,D ,NP0 ,TC ,1005 ,R/TP C625 ECCH0000112 CAP,CERAMIC,CHIP...
  • Page 66 LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK CN301 ENBY0004001 CONNECTOR,BOARD TO BOARD 50 PIN,1.5 mm,STRAIGHT , ,HEADER CN600 ENSY0001901 CONN,SOCKET 6 PIN,ANGLE , ,1.5 mm, CN601 ENZY0000501 CONNECTOR,ETC 4 PIN,2.5 mm,ETC ,GOLD ,BATTERY CONNECTOR D600 EDSY0005701 DIODE,SWITCHING EMT3 ,80 V,4 A,R/TP , D601 EDSY0005201 DIODE,SWITCHING...
  • Page 67 10. Replacement Parts list LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK Q101 EQBN0005801 TR,BJT,NPN EMT3 ,150 mW,R/TP ,DIGITAL TRANSISTOR Q200 EQBN0007601 TR,BJT,NPN SOT-23 ,0.15 W,R/TP ,EMT3 Q201 EQBN0005801 TR,BJT,NPN EMT3 ,150 mW,R/TP ,DIGITAL TRANSISTOR Q600 EQFP0002701 TR,FET,P-CHANNEL SO-8 ,3.0 W,60 V,3.5 A,R/TP , Q601 EQBN0007901 TR,BJT,NPN...
  • Page 68 LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK R225 ERHY0000213 RES,CHIP 47 ohm,1/16W,J,1005,R/TP R226 ERHY0000213 RES,CHIP 47 ohm,1/16W,J,1005,R/TP R227 ERHY0000223 RES,CHIP 150 ohm,1/16W,J,1005,R/TP R228 ERHY0000261 RES,CHIP 10K ohm,1/16W,J,1005,R/TP R230 ERHY0000269 RES,CHIP 30K ohm,1/16W,J,1005,R/TP R231 ERHY0000241 RES,CHIP 1K ohm,1/16W,J,1005,R/TP R232 ERHY0000225 RES,CHIP 200 ohm,1/16W,J,1005,R/TP R233...
  • Page 69 10. Replacement Parts list LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK R606 ERHY0000207 RES,CHIP 20 ohm,1/16W,J,1005,R/TP R607 ERHY0000207 RES,CHIP 20 ohm,1/16W,J,1005,R/TP R608 ERHY0000207 RES,CHIP 20 ohm,1/16W,J,1005,R/TP R609 ERHY0001102 RES,CHIP 0.2 ohm,1/4W ,F ,2012 ,R/TP R610 ERHY0000280 RES,CHIP 100K ohm,1/16W,J,1005,R/TP R611 ERHY0000247 RES,CHIP...
  • Page 70 LEVEL LOCATION NO. PART NO. DESCRIPTION SPECIFICATION REMARK U208 EXSC0003901 1748 MHz, PPM, pF,SMD ,9.8*7.0*1.9 ,DUAL TX VCO U209 STMY0006501 TRANSFORMER,MATCHING 6 PIN,SMD ,BALUN FOR GSM, 2012, 1402.50 U210 EXSC0004001 1323 MHz,0 PPM,100 pF,SMD ,8.6*6.8*1.6 , U211 EUSY0067101 SOT-23-5 ,5 PIN,R/TP ,150mA LDO REGULATOR U212 EXSK0001501 VCTCXO...
  • Page 71 LABEL,BARCODE 84 x 203.5 MLAQ00 MLAQ0001601 LABEL,UNIT BOX MPAD00 MPAD0000701 PACKING,SHELL SBPL00 SBPL0055301 BATTERY PACK,LI-ION 3.7 V,1050 mAh,1 CELL,PRISMATIC ,LG-600, GSM SBPL01 SBPL0018301 BATTERY PACK,LI-ION 3.7 V,600 mAh, CELL,PRISMATIC , SGCC00 SGCC0001301 CHARGER,CIGAR LIGHTER LG-500 ,ADAPTER / CHARGER SGCD00 SGCD0018701 CHARGER,DESKTOP 2±∏-SS MICOM ,...
  • Page 72 - 70 -...

Table of Contents