Remove the system board, the interposer card, and the PC Card/ExpressCard slots
assembly from the MG frame together.
When attaching the system board to the frame, do as follows:
1. Adjust the placement with the small projection a . Then attach the CPU
support plate 1 .
2. Secure the screws in order as shown in this figure.
Attention: Do not use an electric screwdriver to secure these screws.
Removing and replacing a FRU
13
12
1
a
3
6
7
5
9
10
8
12
ThinkPad T61 and T61p (14.1-inch)
2
4
11
97