Table of Contents
Advertisement
5 . 5 .
5 .
H a r d d i s k a c t i v i t y L E D c o n n e c t o r ( 4 - p i n H D L E D 1 )
H a r d d i s k a c t i v i t y L E D c o n n e c t o r ( 4 - p i n H D L E D 1 )
5 .
5 .
H a r d d i s k a c t i v i t y L E D c o n n e c t o r ( 4 - p i n H D L E D 1 )
H a r d d i s k a c t i v i t y L E D c o n n e c t o r ( 4 - p i n H D L E D 1 )
H a r d d i s k a c t i v i t y L E D c o n n e c t o r ( 4 - p i n H D L E D 1 )
This connector supplies power to the hard disk activity LED. The read
or write activities of any device connected to the primary/secondary
IDE connectors or the SATA connectors cause this LED to light up.
NCL-DS Series SCSI/SATA card activity LED connector
6 . 6 .
6 .
6 .
U S B c o n n e c t o r ( 1 0 - 1 p i n U S B 3 4 )
U S B c o n n e c t o r ( 1 0 - 1 p i n U S B 3 4 )
U S B c o n n e c t o r ( 1 0 - 1 p i n U S B 3 4 )
6 .
U S B c o n n e c t o r ( 1 0 - 1 p i n U S B 3 4 )
U S B c o n n e c t o r ( 1 0 - 1 p i n U S B 3 4 )
This connector is for USB 2.0 ports. Connect the USB module cable to
this connector, then install the module to a slot opening at the back
of the system chassis. This USB connector complies with USB 2.0
specification that supports up to 480 Mbps connection speed.
NCL-DS Series USB connector
2 - 3 0
2 - 3 0
2 - 3 0
2 - 3 0
2 - 3 0
HDLED1
1
USB34
C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n
C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n
C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n
C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n
C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n
1
Advertisement
Table of Contents
