Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for METRObility Optical Systems Radiance Sonet Single Interface Line Cards R125-34
Summary of Contents for METRObility Optical Systems Radiance Sonet Single Interface Line Cards R125-34
- Page 1 INGLE NTERFACE OC-12 Installation & User Guide Models: R125-34 / R125-37 / R135-34 ADIANCE SONET OC-3 ARDS OC-3...
- Page 2 Metrobility Optical Systems, Inc. © 2001-02, 2004 Metrobility Optical Systems, Inc. All rights reserved. Printed in USA.
-
Page 3: Table Of Contents
Metrobility, Metrobility Optical Systems, and NetBeacon are registered trademarks of Metrobility Optical Systems, Inc. The Metrobility Optical Systems logo is a trademark of Metrobility Optical Systems, Inc. The information contained in this document is assumed to be correct and current. The manufacturer is not responsible for errors or omissions and reserves the right to change specifications at any time without notice. -
Page 4: Overview
Overview The Radiance SONET single interface line card provides seamless integration between fiber optic multimode and singlemode segments in OC-3/ STM-1 or OC-12/STM-4 networks. Use the card’s singlemode connector to extend your network reach up to 40 km. The Radiance line card is manageable through console commands, Metrobility’s ®... -
Page 5: Installation Guide
Carry Forward (LLCF) is a feature that is always enabled. When setting DIP switches, the UP position is when the lever of the DIP switch is pushed away from the circuit board. The DOWN position is when the lever is pushed toward the circuit board. - Page 6 LLR1 enables/disables Link Loss Return on Port 1, and LLR2 enables/ disables the function on Port 2. To enable Link Loss Return for a port, set its LLR switch ON (up). Set the switch OFF (down) to disable the function.
-
Page 7: Step 3: Install The Line Card
Install the Line Card The Radiance SONET single interface line card offers the ease of plug- and-play installation and is hot-swappable. All cards must be firmly secured to the chassis before network connections are made. Follow the simple steps outlined below to install your line card. OC-12 10/100 10/100... -
Page 8: Step 4: Connect To The Network
Connect to the Network To connect the Radiance line card to the network, insert the fiber optic cables into the appropriate SC connectors. (See the figure below.) Be sure the card is secured to the chassis before making network connec- tions. -
Page 9: User Guide
User Guide This section contains more information regarding the operating features of the Radiance SONET single interface line card. LED Indicators The Radiance SONET single interface line card provides three LEDs on the front panel for the visible verification of unit status and proper functionality. These LEDs can assist with troubleshooting and overall network diagnosis and management. -
Page 10: Link Loss Return (Llr)
Line Card B, with LLR2 enabled, will return a no-link condition to its link partner, Line Card A. Because the line cards are designed with LLCF functionality, the no-link condition is carried forward to the switch/hub where a trap is generated to the management station. The network administrator can then determine the source of the loss. -
Page 11: Link Loss Carry Forward (Llcf)
LED lit = established link If a connection breaks, the line cards carriy that link loss forward to the switch/ hub which generates a trap to the management station. The network administra- tor can then determine the source of the problem. -
Page 12: Topology Solutions
Topology Solutions Servers Switch Radiance R5000 Central Service Platform with SONET Single Interface Line Cards Switch Multimode Links Singlemode Links User Guide PC running Network Management Software Workgroup Hub remote connection — singlemode Enterprise Switch Enterprise... -
Page 13: Technical Specifications
Technical Specifications Data Rate Data Rate _____________ 155Mbps (OC-3/STM-1), 622Mbps (OC12/STM-4) Power Consumption Input ______________________________________________ 5V @ 0.8A, 4W Environmental Operating Temperature ____________________________________ 0 to 50 C Storage Temperature ____________________________________ -30 to 70 C Operating Humidity _________________________ 5% to 95% non-condensing Weight _______________________________________________ 5 oz (0.14 kg) Radiance SONET Single Interface Line Cards µ... -
Page 14: Product Safety, Emc And Compliance Statements
Product Safety, EMC and Compliance Statements This equipment complies with the following requirements: • UL • CSA • EN60950 (safety) • FCC Part 15, Class A • EN55022 Class A (emissions) • EN50082-1 (immunity) • IEC 825-1 Classification • Class 1 Laser Product •... -
Page 15: Warranty And Servicing
Warranty and Servicing Three-Year Warranty for Radiance SONET Single Interface Line Card Metrobility Optical Systems, Inc. warrants that every Radiance SONET single interface line card will be free from defects in material and workmanship for a period of THREE YEARS from the date of Metrobility shipment. This warranty covers the original user only and is not transferable. - Page 16 Product Manuals The most recent version of this manual is available online at http://www.metrobility.com/support/manuals.htm Product Registration To register your product, go to http://www.metrobility.com/support/registration.asp 25 Manchester Street, Merrimack, NH 03054 USA tel: 1.603.880.1833 • fax: 1.603.594.2887 www.metrobility.com 5660-000018 D 3/04...
Need help?
Do you have a question about the Radiance Sonet Single Interface Line Cards R125-34 and is the answer not in the manual?
Questions and answers