Installation; Unpack And Check - AEG protect d. 1000 Operating Instructions Manual

4

Installation

4.1

Unpack and check

The device has been extensively tested and checked. Although
packaging and shipping was done carefully, we cannot fully rule
out any transport damage.
i
On receipt, check the contents of the transport containers for any
damages. If necessary, ask the shipping company to check the
goods and make a note of any damages while an employee with
the shipping company is still present and report the damage
within eight days of receipt to an AEG representative or retailer.
Check the contents for completeness:
 PROTECT D with 1000, 1500, 2000 or 3000 VA
 2 mounting brackets incl. 2 x 4 screws M4x8
 2 input power cords
(1x CEE 7/7 hybrid plug / 1x BS1363 plug)
 3 output device cables IEC320 10A
as well as 1 device cable. IEC320 16A for the D.3000
 2 communication cables (RS232 & USB)
 2 rack rails incl. screws and cage nuts
 "CompuWatch" management software on CD
 Safety precautions & Operating instructions
External battery modules include the following:
 External battery unit
PROTECT D.1000BP, D.1500BP or D.2030BP
 2 mounting brackets incl. 2 x 4 screws M4x8
 2 rack rails incl. screws and cage nuts
Please report any deviations to our hotline (see pg. 5).
Any claims based on transport damages must be
made directly to the shipping company!
22