Motorola APX 7000 Detailed Service Manual page 634

Glossary-6
Term
PC Board
PCIC
phase-locked loop
PL
PLL
Power Control IC
private-line tone
squelch
Programmable
Read-Only Memory
PROM
PTT
Push-to-Talk
radio frequency
radio frequency
power amplifier
Radio Interface Box
Radio Service
Software
RAM
random access
memory
read-only memory
real-time clock
Printed Circuit Board. Also referred to as a PCB.
See Power Control IC.
A circuit in which an oscillator is kept in phase with a reference, usually
after passing through a frequency divider.
See private-line tone squelch.
See phase-locked loop.
The power control IC is intended for closed-loop bias control of power
amplifiers. The device facilitates accurate control of the current
delivered to the power amplifier (PA) via a control voltage.
A continuous sub-audible tone that is transmitted along with the carrier.
See also DPL.
A memory chip on which data can be written only once. Once data has
been written onto a PROM, it remains there forever.
See Programmable Read-Only Memory.
See Push-to-Talk.
The switch or button usually located on the left side of the radio which,
when pressed, causes the radio to transmit. When the PTT is released,
the unit returns to receive operation.
The portion of the electromagnetic spectrum between audio sound and
infrared light (approximately 10 kHz to 10 GHz).
Amplifier having one or more active devices to amplify radio signals.
A service aid used to enable communications between a radio and the
programming software.
DOS-based software containing the feature set of an ASTRO radio. See
also CPS.
See random access memory.
A type of computer memory that can be accessed randomly; that is, any
byte of memory can be accessed without touching the preceding bytes.
A type of computer memory on which data has been prerecorded. Once
data has been written onto a ROM chip, it cannot be removed and can
only be read.
A module that keeps track of elapsed time even when a computer is
turned off.
Definition
Glossary