Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 99-1005
KIA Sedona 2002-2005
KIA Spectra 2002-2004
(2004 Base and LS models only)
99-1005
KIT FEATURES
• DIN Radio with Pocket Provision
• ISO Mount Radio with Pocket Provision
KIT COMPONENTS
A) Radio Housing • B) ISO Snap In Brackets • C) Trim Plate • D) (4) Phillips Pan Head Screws
• E) Rear Support Bracket • F) Pocket
A
1-800-221-0932
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
APPLICATIONS
B
E
TOOLS REQUIRED:
• Phillips Screwdriver
C
F
www.metraonline.com
D
Advertisement
Table of Contents
Related Manuals for Metra Electronics 99-1005
Summary of Contents for Metra Electronics 99-1005
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-1005 KIA Sedona 2002-2005 KIA Spectra 2002-2004 (2004 Base and LS models only) 99-1005 KIT FEATURES • DIN Radio with Pocket Provision • ISO Mount Radio with Pocket Provision KIT COMPONENTS A) Radio Housing • B) ISO Snap In Brackets • C) Trim Plate • D) (4) Phillips Pan Head Screws •...
- Page 2 Final Assembly ........... 5 *Note: Refer also to the instructions included with the aftermarket radio. 99-1005 (2004 Base and LS models only) ... . 2...
- Page 3 (Figure A) Remove (4) Phillips screws from the radio trim panel then unclip and remove the panel. (Figure B) Remove (4) Phillips screws securing radio. Unplug and remove radio. (Figure C) Continue to kit assembly. 99-1005 DASH DISASSEMBL Y...
- Page 4 Unsnap and remove entire panel from left side of steering wheel to right side surrounding radio. (Figure C) Remove (4) Phillips screws securing radio. (Figure D) Continue to kit assembly. 99-1005 DASH DISASSEMBL Y (2004 Base and LS models only)
- Page 5 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure B) Slide the aftermarket radio into the cage until it snaps into place. (Figure C) Continue to final assembly. 99-1005 KIT ASSEMBL Y...
- Page 6 To remove the radio from the radio housing, unclip and remove ISO trim-plate. Then use a small flat blade screw driver to release the ISO snap in brackets and slide the radio out of the radio housing. 99-1005 KIT ASSEMBL Y...
- Page 7 Dimmer ....Orange / White *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 99-1005 FINAL ASSEMBL Y FINAL ASSEMBL Y A) Strip wire ends back 1/2"...
- Page 8 99-1005 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 11/09/06 © COPYRIGHT 2004 METRA ELECTRONICS CORPORATION INST99-1005...
Need help?
Do you have a question about the 99-1005 and is the answer not in the manual?
Questions and answers