Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 99-7325
Hyundai Santa Fe
(excludes 2010 NAV models)
99-7325
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Radio Provision with Pocket
KIT COMPONENTS
A) Radio Housing B) ISO Brackets C) Trim Plate
A
Small Flat Blade Screwdriver/ Panel Removal Tool
1-800-221-0932
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
APPLICATIONS
2007-2010
C
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-7302 - Hyundai Harness 2007-up
• 70-7305 - Hyundai / KiA Harness 2009
Antenna Adapter:
• 40-KI11 - 2009-10 Santa Fe Adapter
TOOLS REQUIRED:
• Phillips Screwdriver
www.metraonline.com
Advertisement
Related Manuals for Metra Electronics 99-7325
Summary of Contents for Metra Electronics 99-7325
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-7325 Hyundai Santa Fe 2007-2010 (excludes 2010 NAV models) 99-7325 KIT FEATURES • DIN Radio Provision with Pocket • ISO Radio Provision with Pocket KIT COMPONENTS A) Radio Housing B) ISO Brackets C) Trim Plate WIRING AND ANTENNA CONNECTIONS (Sold Separately) Harness: •...
- Page 2 Final Assembly ......... . 4 *Note: Refer also to the instructions included with the aftermarket radio. 99-7325 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
-
Page 3: Hyundai Santa Fe 2007-2010
(Figure C) Remove (2) Phillips screws then unclip and remove the panel sur- rounding the radio including the a/c vents. (Figure D) Remove (4) Phillips screws securing the radio. Unplug and remove radio. Continue to kit assembly. 99-7325 DASH DISASSEMBLY... -
Page 4: Kit Assembly
Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure A) Slide the aftermarket radio into the cage until it snaps into place. (Figure B) Continue to final assembly. 99-7325 KIT ASSEMBLY... -
Page 5: Iso Radio Provision With Pocket
(Figure A) Slide the radio into the radio opening until the side clips snap into place. (Figure B) Snap the trim plate onto the front of the Radio Housing. (Figure B) Continue to final assembly. 99-7325 KIT ASSEMBLY... -
Page 6: Final Assembly
Dimmer ....Orange / White *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 99-7325 FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together... - Page 7 99-7325 NOTES...
- Page 8 99-7325 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 04/27/10 © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION INST99-7325...