Settings - Maytag Mgt8885xs Use & Care Manual

Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.
1. Press SETTINGS once.
"TEMP UNIT" will appear in the upper text area while
"FAHRENHEIT. Press (+) for Celsius" will scroll twice from
right to left in the lower text area.
2. Press the Temp/Time "+" pad to change the temperature unit
setting.
"CELSIUS. Press (+) for Fahrenheit" will scroll twice from right
to left in the lower text area.
3. "CELSIUS Selected" will scroll twice from right to left in the
lower text area. The temperature units have been changed.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
Valid pad press
End of Kitchen Timer (long tone)
Function has been entered
Oven is preheated
Three tones
Invalid pad press
Four tones
End of cycle
Adjusting Sound On or Off
The oven sound is factory preset for On but can be changed to
Off.
1. Press SETTINGS twice until "SOUND" appears in the upper
text area and "ON. Press (+) for OFF" scrolls twice from right
to left in the lower text area.
2. Press the Temp/Time "+" pad to turn the sound Off. "OFF.
Press (+) for ON" will scroll twice from right to left in the lower
text area.
3. "OFF Selected" will scroll twice from right to left in the lower
text area. The sound has now been turned off.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press SETTINGS 3 times until "SOUND VOLUME" appears in
the text area and "HIGH. Press (+) for LOW" scrolls twice
from right to left in the lower text area.
2. Press the Temp/Time "+" pad to turn the sound Low. "LOW.
Press (+) for HIGH" scrolls twice from right to left in the lower
text area.
3. "Low Selected" scrolls twice from right to left in the lower text
area. The sound volume has now been changed.

Settings

Adjusting End Tone On or Off
The end tone is factory preset for On but can be changed to Off.
1. Press SETTINGS four times until "END TONE" appears in the
upper text area and "ON. Press (+) for OFF" scrolls twice from
right to left in the lower text area.
2. Press the Temp/Time "+" pad to turn the end tone Off. "OFF.
Press (+) for ON" will scroll twice in the lower text area.
3. "OFF Selected" will scroll twice from right to left in the lower
text area. The end tone has now been turned off.
Adjusting Keypress Tone On or Off
The keypress tone is factory preset for On but can be changed to
Off.
1. Press SETTINGS five times until "KEYPRESS TONE" appears
in the upper text area and "ON. Press (+) for OFF" scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time "+" pad to turn the keypress tone Off.
"OFF. Press (+) for ON" will scroll twice in the lower text area.
3. "OFF Selected" will scroll twice from right to left in the lower
text area. The keypress tone has now been turned off.
Adjusting Reminder Tone On or Off
The reminder tone is factory preset for On but can be changed to
Off.
1. Press SETTINGS six times until "REMINDER TONE" appears
in the upper text area and "ON. Press (+) for OFF" scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time "+" pad to turn the reminder tone Off.
"OFF. Press (+) for ON" will scroll twice in the lower text area.
3. "OFF Selected" will scroll twice from right to left in the lower
text area. The reminder tone has now been turned off.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is factory preset at the factory for the 12-hour
format.
To Change the Clock to 24-Hour Format:
1. Press SETTINGS seven times until "12/24 HOUR" appears in
the upper text area and "12 HR. Press (+) for 24 Hr" appears
in the lower text area.
2. Press the Temp/Time "+" pad once to select 24 hour and
again to select 12 hour.
3. Wait 30 seconds or press CANCEL to accept the setting.
To Set the Clock:
Before setting, make sure the oven and Kitchen Timer are off.
1. Press CLOCK. "Set Time" will appear in the upper text area.
2. Press the Temp/Time "+" or "-" pads until the desired time is
displayed.
3. "Press CLOCK" will appear in the upper text area and "or
Push START" will appear in the lower text area.
4. Press CLOCK or START. "Time Set" will appear in the upper
text area. Once it disappears, the time is set.
9