Connecting An Audio System; Connecting A Dvd Player - Marks & Spencer MS42102DVB-LED User Manual

Connecting external devices (continued)

Connecting an audio system

You can supply the TV sound to the stereo system (A) via either the analogue Cinch audio
output or the digital audio output (coaxial) (B).
(A)
All illustrated cables are not supplied)
Using the Analogue Audio Output
Use an RCA audio cable to connect the analogue audio output of your TV set to the left and
right stereo audio input connectors. (Please consult your hi-fi instructions for details). When
connecting, make sure to match the connectors colour codes red to red and white to white.
Using the coaxial Digital Audio Output
If you have a digital sound amplifier/decoder (B), use a coaxial cable to connect the digital audio
output (coaxial) of your TV set to the corresponding digital audio input of your digital sound system.
(Please consult your digital audio system's instructions for details)
TV Back
Coax
Coax Cable
Connect to Audio Amplifier device to the COAX output jack on the TV.

Connecting a DVD player

Connect a DVD player using either a SCART cable or the HDMI cable.
(only if your external equipment supports HDMI).
(All illustrated cables are not supplied)
Audio out
L R
RCA audio cable
HDMI to HDMI
SCART
Coax
(B)
Coaxial cable
When using the SCART cable
Switch on the TV
Switch on the DVD player
Select SCART as input source
When using the HDMI cable
Select HDMI as input source
17