Related Manuals for My Weigh iBalance 601
Summary of Contents for My Weigh iBalance 601
- Page 1 High Precision Balances iBalance 601 iBalance M01 (LED Display) Operation Manual KD-TBED-en,V1.2-2005...
-
Page 2: Table Of Contents
Select the range of zero track and zero display Table of Contents Attention Notes ------------------------------------------(1) Press the key until the display shows “0.5d. 1.0d. 1.5d. II. Transport Protection ----------------------------------- (1) 2.0d. 3.0d” to power on, press the key to select the III. -
Page 3: Attention Notes
XII. Options I. Attention Notes RS-232 interface To enable you to use this scale precisely, we suggest you to read these instructions carefully before operation. XIII Calibration Do not get the scale wet. If it gets wet, please wipe it Press and hold to power on , release the key at the with a dry cloth. -
Page 4: Specification
Please use an independent power outlet to avoid interference by other electrical appliances. In order to bring the balance into a horizontal position, the adjustable feet turned either clockwise counter-clockwise until the air bubble is in the center of the 2D (HEX) = “- ”(negative sign) 20 (HEX) =“... -
Page 5: Keypad Functions
**SPECIAL WARNING** Explanation Of Display Symbols Cell-Phones, Cordless-Phones, and any radio-frequency device can cause temporary interference and cause the scale to ● : Scale is in ZERO mode. temporarily not work properly. Please do not use any : Scale is in TARE mode. ●... -
Page 6: Counting Function
: Zero key, press this key to return the display to zero if a small weight reading is left while unloaded/empty. Put a container on the pan and press when the display VII. Counting function reading is stable. The tare weight will be stored into memory and display will be brought to zero.
Need help?
Do you have a question about the iBalance 601 and is the answer not in the manual?
Questions and answers