Chevrolet silverado / gmc sierra 2014-up car radio panel kit (16 pages)
Summary of Contents for Metra Electronics 99-3306
Page 1
INSTALLATION INSTRUCTIONS FOR PART 99-3306 Chevrolet Aveo sedan 2007-2010 Pontiac G3 2007-2009 99-3306 KIT FEATURES • DIN Mount Radio Provision with Pocket • ISO Mount Radio Provision with Pocket • Double DIN Mount Radio Provision • Stacked ISO Units Provision KIT COMPONENTS A) Radio Housing •...
Final Assembly ......... . . 6 *Note: Refer also to the instructions included with the aftermarket radio. 99-3306 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
Unclip and remove trim panel around radio. (Figure A) Remove (4) 9/32” screws securing the radio. Unplug and remove radio. (Figure B) Continue to kit assembly. 99-3306 DASH DISASSEMBLY SOUND SCAN SOUND SCAN...
99-3306 KIT ASSEMBLY DIN MOUNT RADIO PROVISION WITH POCKET Note: Refer also to the instructions included with the aftermarket radio. Slide the DIN cage into the Radio Housing and secure by bending the metal locking outward. (Figure A) Slide the aftermarket radio into the DIN cage until it snaps into place.
Slide the radio into the radio opening until it snaps into place. (Figure B) Snap the ISO Trim Plate onto the front of the Radio Housing. (Figure B) Snap the pocket into the radio hous- ing. (Figure C) Continue to final assembly. 99-3306 KIT ASSEMBLY...
(Figure C) Snap the Double DIN trim-plate onto the front of the housing/radio assem- bly. (Figure C) Continue to final assembly. 99-3306 KIT ASSEMBLY...
(Figure C) Snap the Double DIN trim-plate onto the front of the housing/radio assem- bly. (Figure D) Continue to final assembly. 99-3306 KIT ASSEMBLY...