Specifications - Makita DGA402 Instruction Manual

ENGLISH (Original instructions)
1-1. Button
1-2. Red indicator
1-3. Battery cartridge
2-1. Star marking
3-1. Indication lamp
4-1. Shaft lock
5-1. Slide switch
7-1. Wheel guard
7-2. Bearing box
7-3. Screw

SPECIFICATIONS

Max. wheel thickness
Rated speed (n) / No load speed (n
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Noise
The typical A-weighted
according to EN60745:
Model DGA450
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DGA452
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Explanation of general view
8-1. Lock nut
8-2. Depressed center grinding
wheel/Multi-disc
8-3. Inner flange
9-1. Lock nut wrench
9-2. Shaft lock
11-1. Lock nut
11-2. Abrasive cut-off wheel/diamond
11-3. Inner flange
Model
Wheel diameter
Spindle thread
)
0
Overall length
Net weight
Rated voltage
noise level determined
) : 74 dB (A)
pA
) : 76 dB (A)
pA
value (tri-axial vector
wheel
DGA402
100 mm
6.4 mm
M10
2.2 kg
D.C. 18 V
ENE048-1
Model DGA450
Work mode : surface grinding
Vibration emission (a
ENG905-1
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DGA452
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
ENG900-1
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
sum)
used in a preliminary assessment of exposure.
The declared vibration emission value is used for
•
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
3
11-4. Wheel guard for abrasive cut-off
wheel/diamond wheel
12-1. Exhaust vent
12-2. Inhalation vent
13-1. Limit mark
14-1. Holder cap cover
14-2. Screwdriver
15-1. Brush holder cap
15-2. Screwdriver
DGA450
115 mm
6.4 mm
M14 or 5/8" (country specific)
-1
11,000 (min )
317 mm
2.2 kg
D.C. 14.4 V D.C. 18 V
2
) : 8.5 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
2
) : 10.0 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
DGA452
6.4 mm
2.3 kg
ENG902-1