Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 99-1003
Sportage 1995-2003
99-1003
KIT FEATURES
• DIN Radio Provision
KIT COMPONENTS
A) Radio Housing #1 • B) Radio Housing #2 • C) Mounting Brackets • D) (4) Captive Studs
• E) (4) Pal Nuts
A
E
Panel Removal Tool • Cutting Tool • Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
APPLICATIONS
KIA
Rio 2001
Sephia 1995-2001
Spectra 2000-2001
B
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• 70-1003 - KIA Harness 1995-02
• Antenna Adapter N/R
TOOLS REQUIRED:
C
www.metraonline.com
D
Advertisement
Table of Contents
Related Manuals for Metra Electronics 99-1003
Summary of Contents for Metra Electronics 99-1003
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-1003 Sephia 1995-2001 Spectra 2000-2001 Sportage 1995-2003 99-1003 KIT FEATURES • DIN Radio Provision KIT COMPONENTS A) Radio Housing #1 • B) Radio Housing #2 • C) Mounting Brackets • D) (4) Captive Studs • E) (4) Pal Nuts Panel Removal Tool •...
-
Page 2: Table Of Contents
Final Assembly ......... . 9 *Note: Refer also to the instructions included with the aftermarket radio. 99-1003... -
Page 3: Kia Rio 2001
Remove knob from climate control slide lever. (Figure B) Unsnap and remove radio/climate control trim panel. (Figure C) 5 Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 99-1003 DASH DISASSEMBL Y RIO 2001... -
Page 4: Sephia 1995-1997
Phillips head screw from behind switch blank. Unclip and remove dash trim panel. Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 99-1003 DASH DISASSEMBL Y SEPHIA 1995-1997... -
Page 5: Sephia 1998-2001
Remove (1) Phillips head screw from above instrument cluster. Unclip and remove dash trim panel. Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 99-1003 DASH DISASSEMBL Y SEPHIA 1998-2001 SPECTRA 2000-2001... -
Page 6: Sportage 1995-1997
Remove ashtray and (2) Phillips head screws inside ashtray cavity. Unclip and remove dash trim panel. Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 99-1003 DASH DISASSEMBL Y... -
Page 7: Sportage 1998-2000
Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip and remove dash trim panel. Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 99-1003 DASH DISASSEMBL Y SPORTAGE 1998-2000... -
Page 8: Sportage 2001-2003
(Figure C) Remove (4) Phillips head screws from instrument trim panel and remove panel. (Figure D) Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit assembly. 99-1003 DASH DISASSEMBL Y... -
Page 9: Kit Assembly Preparation
"A" "A" "A" "A" "A" Continue to kit assembly. 99-1003 KIT PREPARATION SEPHIA 1998-2001 SPECTRA 2000-2001 Cut and remove mounting tabs “B” from Radio Housing #1. (The tabs can be identified by the letter stamped on the back of each tab.) (Figure B) "B"... -
Page 10: Din Radio Provision
Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward. (Figure B) Slide the radio into the DIN cage/housing assembly until it snaps into place. (Figure C) Continue to final assembly. 99-1003 KIT ASSEMBL Y DIN MOUNT RADIO... -
Page 11: Final Assembly
*NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 99-1003 FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) Twist ends together... - Page 12 99-1003 INSTRUCTIONS 1-800-221-0932 www.metraonline.com Rev. 04/13/09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION INST99-1003...
Need help?
Do you have a question about the 99-1003 and is the answer not in the manual?
Questions and answers