Advertisement
INSTALLATION INSTRUCTIONS FOR PART 99-1008
99-1008
KIT FEATURES
• Recessed DIN Head Unit
• ISO Head Unit Provisions with Pocket
KIT COMPONENTS
A) Radio Housing
I
B) ISO Brackets
A
1-800-221-0932
© COPYRIGHT 2004-2007 METRA ELECTRONICS CORPORATION
APPLICATIONS
• 2003-2006 Kia Sorento LX
• 2004.5-2006 Kia Spectra
I
C) Trim Plate
B
TOOLS REQUIRED:
Small Flat Blade Screwdriver I Phillips Screwdriver
C
www.metraonline.com
Advertisement
Table of Contents
Related Manuals for Metra Electronics 99-1008
Summary of Contents for Metra Electronics 99-1008
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-1008 • 2003-2006 Kia Sorento LX • 2004.5-2006 Kia Spectra 99-1008 KIT FEATURES • Recessed DIN Head Unit • ISO Head Unit Provisions with Pocket KIT COMPONENTS A) Radio Housing B) ISO Brackets Small Flat Blade Screwdriver I Phillips Screwdriver 1-800-221-0932 ©...
- Page 2 99-1008 Dash Disassembly • - 2003-2006 Kia Sorento LX ... 1 - 2004.5-2006 Kia Spectra ... 2 Kit Assembly • - DIN Head Unit Provision... 3 - ISO DIN Head Unit Provision... 3 Final Assembly ...4 • Notes... 5 •...
- Page 3 Disconnect any plugs from the trim panel and then remove panel. (Figure B) Remove (4) Phillips screw from radio (Figure C) to remove radio. Cut along the scored lines of the radio housing’s mounting tabs. (Figure D) 99-1008...
- Page 4 99-1008 2004.5- 2006 KIA SPECTRA Disconnect the negative battery terminal to prevent an accidental short circuit. Using a flat blade screwdriver as a pry tool, unsnap and remove the center dash panel including the cli- mate controls and vents from around the radio.
-
Page 5: Din Head Unit Provision
99-1008 DIN HEAD UNIT PROVISION Slide the DIN cage into the Radio Housing and secure by bending the (Figure A) metal locking tabs down. Slide the aftermarket head unit into the cage and secure. Snap the Trim plate into the Radio Housing. - Page 6 99-1008 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit) Re-connect the negative battery terminal and test the unit for proper operation.
- Page 7 99-1008...
- Page 8 INST991008 1-800-221-0932 www.metraonline.com © COPYRIGHT 2004-2007 METRA ELECTRONICS CORPORATION Rev. 06-13-07...
Need help?
Do you have a question about the 99-1008 and is the answer not in the manual?
Questions and answers