Warning! Do not immerse the appliance or the cord set or the
plug in water or any other liquid.
Wipe the exterior with a damp cloth.
Do not use scouring pads.
If necessary, use a mild detergent to remove spots. Do not
use any abrasive or solvent based cleaner.
Descaling the appliance
If the appliance is used in an area with hard water, it is
advised to descale the appliance from time to time
Half fill the kettle with cold tap water.
Add 30 ml of white vinegar.
Boil the mixture and allow it to stand for 30 seconds.
Repeat this procedure 2 or 3 times.
Thoroughly rinse the kettle.
Mains plug replacement
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal of the new
Connect the blue lead to the neutral terminal.
If the product is class l (earthed), connect the green / yel-
low lead to the earth terminal.
Warning! If your product is class ll double insulated (only 2
wires in the cord set), no connection is to be made to the earth
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet