Ethernet Adapter Mode - Asus (WL-330) User Manual

Configuration
Two ways to assign WEP keys
Manual Assignment. For a 64-bit encryption, enter 10 hexadecimal digits (0~9,
a~f, A~F) or 5 ASCII characters in each of the four WEP keys. For 128-bit
encryption enter 26 hexadecimal digits (0~9, a~f, A~F) or 13 ASCII characters in
each of the four WEP keys.
Automatic Generation. Type a combination of up to 64 letters, numbers, or
symbols in the Passphrase field. The Setup Wizard utility uses an algorithm to
generate four WEP keys based on the typed combination.
Default Key. This field allows you to specify the default WEP encryption key.
Click OK when finished.
3.2.3

Ethernet adapter mode

The Setup Wizard utility also allows you to configure the Ethernet adapter
settings of the ASUS Pocket Wireless AP.
To change the Ethernet adapter settings:
1. Switch the ASUS Pocket Wireless AP to Ethernet adapter mode using the
mode switch on the bottom of the device.
2. From the Windows
Start > All Programs > ASUS
Utility > Wireless AP WL-330 >
Setup Wizard.
The SSID and WEP encryption keys of the ASUS Pocket Wireless AP must be
the same with that of the AP or wireless client to establish connection.
3-6
®
desktop, click
ASUS Pocket Wireless Access Point (WL-330)