Default
Not stored.
Value Range
Max. 100 characters
Number Format
Selects the format of the CLIP number to be sent to the called party.
Default
National
Value Range
International, +International, National
Remove Digit
Specifies the number of leading digits of the CLIP number to be removed. This setting is compulsory when
PBX-CLIP is selected in From Header—User Part or P-Preferred-Identity Header—User Part.
Default
0
Value Range
0–32
Additional Dial
Specifies the number to be added to the CLIP number in the place of the removed digits. This setting is
compulsory when PBX-CLIP is selected in From Header—User Part or P-Preferred-Identity Header—User
Part.
Default
Not stored.
Value Range
Max. 20 digits (containing of 0–9, *, and #)
Anonymous format in "From" header
Specifies the format of the "From" header when not sending caller ID.
Default
Display name and SIP-URI
Value Range
Display name and SIP-URI, Display name only
Note
If "Display name and SIP-URI" is selected, the display name part and the SIP-URI of the "From" header
will be displayed as "Anonymous".
Document Version 2011-10
Programming Manual for Virtual SIP CO Line Card
3.1.6 Calling Party
33