EN
WARNING
Before using this product, carefully read this manual and retain it for future reference. Read also
the instructions for the PLAYSTATION
3 system.
®
Do not touch material from a leaking battery.
–
Contact of the material with the eyes or body can result in injury or burns to the eyes or skin.
Even if foreign substances are not immediately visible, chemical changes in the material can
result in injuries occurring at a later time.
If you do come in contact with material from a leaking battery, take the following actions:
–
If the material gets into the eyes, do not rub. Flush the eyes with clean water and immediately
seek medical attention.
–
If the material comes into contact with the skin or clothes, rinse the affected area thoroughly
with water. Consult your doctor if inflammation or soreness develops.
Precautions
Battery use
Never throw batteries into a fire.
Do not use batteries other than those specified, and always replace with the same type of
battery. Do not mix old and new batteries.
Insert batteries with the plus and minus ends in the correct direction.
Remove batteries when they have reached the end of their life, or if the BD remote control is to
be stored for an extended period of time.
Use and handling
Do not expose the BD remote control to high temperatures, high humidity or direct sunlight.
Do not allow liquid or small particles to get into the product.
Do not put heavy objects on the product.
Never disassemble or modify the product.
Do not throw or drop the product, or subject it to strong physical shock.
Do not place any rubber or vinyl materials on the product exterior for an extended period of
time.
When cleaning the product, use a soft, dry cloth. Do not use solvents or other chemicals.
Preparing for use
Inserting the batteries
Remove the cover from the BD remote control rear and insert the supplied batteries. Set the
batteries in the correct position.
Updating the PS3™ system
PS3™ system software version 1.30 or later is required to use the BD remote control. To check
TM
the system software version, from the PS3
system’s home menu, select
(Settings) >
(System Settings) > “System Information”.
You must update the system software if it is a version earlier than 1.30. Use any of the following
methods to perform the update.
Network update
Download the update data directly to the PS3™ system. From the system’s home menu, select
(Settings) >
(System Update) > “Update via Internet”.
Update using a PC
Use a PC to download the update data to compatible storage media.
For details, visit http://asia.playstation.com.
TM
For other update methods, contact the PS3
service line at the number listed on your warranty
card for assistance.
Registering the BD remote control with the PS3™ system
Before using the BD remote control, you must register (“pair”) the remote control with the PS3™
system. This operation is performed only once when you are using the remote control for the first
time.
1
Turn on the PS3™ system.
2
From the system’s home menu, select
(Settings) >
(Accessory Settings)
Device”, and then press the button.
®
> “Register Bluetooth
3
Select the type of device to register.
4
Follow the on-screen instructions.
Hints
Only one BD remote control can be registered with the PS3™ system.
If you register the BD remote control with another PS3™ system, you will have to re-register if
you want to use the remote control again with the first PS3™ system.
Basic operations
Basic operation of the BD remote control
This manual explains button operations for Blu-ray Disc (BD) playback. The same operations
can also be performed when playing DVD videos, videos saved on the hard disk drive or audio
CDs, with the exception of some functions.
Notice
Some content may have preset playback conditions set by the content developer. In this case,
some button operations of the remote control may not be available.