Safety Instructions; Technical Data; Intended Use - Black & Decker EMax32 Original Instructions Manual

ENGLISH

Technical data

V
Voltage
AC
W
Power Input
-1
min
No-Load Speed
mm
Height adjustment
mm
Blade length
kg
Weight

Intended use

Your Black & Decker mower has been designed for mowing
grass. This tool is intended for consumer use only.

Safety instructions

Warning! When using mains-powered appliances, basic
safety precautions, including the following, should always be
injury.
Read all of this manual carefully before operating the

appliance.
Before operating the appliance, make sure that you know

how to switch it off in an emergency.
Retain this manual for future reference.

Training
Read the instructions carefully. Be familiar with the con-

trols and the proper use of the appliance.
Never allow children or people unfamiliar with these

instructions to use the machine. Local regulations can
restrict the age of the operator.
Never operate the machine while people, especially

children, or pets are nearby.
Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their
property.
Preparation
While operating the machine always wear substantial foot-

wear and long trousers. Do not operate the machine when
barefoot or wearing open sandals. Avoid wearing clothing
Thoroughly inspect the area where the machine is to be

used and remove all objects which can be thrown by the
machine.
Before using, always visually inspect to see that the

blade, blade bolt and the blade assembly are not worn or
2
(Original instructions)
EMax32
Type 2
220-240
1200
3500
20 - 60
320
7.4
damaged. Replace worn or damaged components in sets
to preserve balance. Replace damaged or unreadable
labels.
Before use check the supply and extension cord for signs

of damage or aging. If the cord becomes damaged during
use, disconnect the cord from the supply immediately. DO
NOT TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY. Do not use the machine if the cord is dam
aged or worn.
Wear safety glasses or goggles when operating this tool.

Use a face or dust mask whenever the operations take
place in dusty surroundings. Hearing protection should be
worn whenever the sound level seems uncomfortable.
Guard against electric shock. Prevent body contact with

earthed or grounded surfaces (e.g. metal railings, lamp-
posts, etc.).
Operation
Never operate the appliance with defective guards or

and/or grass catchers, in place.

Do not expose the appliance to rain. Do not use the appli-

ance in damp or wet conditions. Preferably do not use the
appliance in wet grass.
Be sure of your footing, particularly on slopes. Be aware

that freshly cut grass is damp and slippery. Do not work on
steep slopes.
Work across the face of slopes, never up and down. Take

extreme caution when changing direction on slopes.
Do not mow excessively steep slopes.

Walk, never run when using the appliance. Do not pull the

appliance towards you or walk backwards when using the
appliance.
Switch on the appliance according to instructions and with

your feet well away from the blade.
Do not start the machine when standing in front of the

discharge opening.
Do not tilt appliance when switching it on, except if the ap-

pliance has to be tilted for starting. In that case, do not tilt
the appliance more than absolutely necessary and lift only
the part that is away from the operator. Always ensure that
both hands are in the operating position before returning
the appliance to the ground.
Switch off the appliance and wait for the blade assem-

bly to stop running if the appliance has to be tilted for
transportation when crossing surfaces other than grass,
and when transporting the appliance to and from the area
to be mowed.
Do not lift or carry the appliance until the blade has come

to a complete standstill.
Keep your hands and feet well away from the blade. Do

not put your hands or feet near or under rotating parts.