Service, Maintenance And Care - Taski swingo 755B power Manual

Clean solution tank filter
Caution:
Clogged filters reduce the flow of the cleaning solution. As a
consequence you may damage the floor coating.
• Switch the machine off.
• Once the solution tank has been drained, screw
the yellow cap from the solution tank filter and
pull it away from its holder.
• Rinse the filter under running water.
If necessary, the filter should be descaled with a 10% TASKI calcacid
solution.
The filter is lower than the tank outflow. A residual amount of
solution will flow out once the filter cap has been unscrewed.
• Refit the solution filter.
Cleaning the tools
Variant: (Option 1255) Automatic brush lowering
• Switch on the keyswitch.
The indicators light up briefly.
• Press the brush unit button to raise the tool.
• Switch the machine off using the keyswitch and remove the key.
Pedal brush unit (optional):
• Switch the machine off using the keyswitch and remove the key.
• To raise the tool, press down the pedal and lock
it in place.
Swingo 1255B model:
• Press the tool ejection handle briefly but firmly
with your foot.
• Clean the tool under running water.
Swingo 755B/855B model:
• Turn the tool anticlockwise away from the tool
coupling using your foot.
• Clean the tool under running water.
Removing and cleaning the squeegee
• Switch the machine off.
• Pull the suction hose away from the squeegee support.
• LIft the squeegee with the foot.
42
• Press the locking springs together. The
squeegee will thereby be released and can be
removed.
• Clean the squeegee with water using a brush.
Optimal suction results can only be obtained with clean and intact
blades!
Cleaning the machine
Caution:
Never clean the machine with high water pressure or a water
hose.
The ingress of water into the machine might cause considerable
damage to mechanical or electrical parts.
• Wipe down the machine with a damp cloth.
Storage / parking of machine (machine is idle)
We recommend that you disconnect the battery from the machine
using the battery disconnection socket when storing / parking the
machine and when charging the battery.
Store the machine with the tank cap slightly open, by:
• lifting the tank lid and turning the dosing aid upside down.
• then rest the tank lid on the dosing aid.
The dosing aid holds the tank lid slightly open,
allowing the tank to dry out. As a result, the
formation of mould and unpleasant smells can
be reduced.

Service, maintenance and care

Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
The machine's maintenance is a pre-condition for trouble-free running and a
long life.
Symbols:
 = After use,  = Every week,  = Every month, ⊗ = Service light
Activity
Recharge batteries
Clean all parts marked yellow
Drain and clean the tanks
Wipe down the machine with a damp cloth
Refill distilled water (wet batteries). Please follow
the manufacturers instructions of use booklet for
these batteries!
Clean the tank lid seal, check for cracks and repla-
ce if necessary
Maintenance programs by TASKI service made by
TASKI technician
   ⊗
page
38
41
42