Turn signals and high beam
The combination switch is on the left of the
steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
Press the combination switch up 1 or
down 2.
i
To signal minor directional changes,
move combination switch to point of
resistance only and release. The turn
signal flashes three times.
High beam
Push the combination switch forward.
The high beam headlamps are switched
on. The high beam headlamp
indicator A in the instrument clus-
ter comes on.
For more information, see "High beam
flasher" ( page 121).
Getting started
Windshield wipers
The combination switch is located on the
left of the steering column.
Combination switch
1 Single wipe
2 Switching on windshield wipers
Make sure the ignition is switched on.
Driving
47