Mercedes-Benz SL 500 Operator's Manual page 143

Controls in detail
Control system
Lighting submenu
Access the Lighting submenu via the
Settings menu. Use the Lighting
menu to change the lamp and lighting set-
tings on your vehicle. The following
functions are available:
Function
Set daytime running lamp mode
(USA only)
Set locator lighting
Exterior lamps delayed
switch-off
Interior lighting delayed
switch-off
142
Setting daytime running lamp mode
(USA only)
sub- Move the selection marker with button
æ or ç to the
menu.
Press button j or k repeatedly
until you see this message in the left
Page
display: Light circuit Headlamp
142
mode .
The selection marker is on the current
143
setting.
143
145
Press æ or ç to select manual or
daytime running lamp (constant) mode.
This function is not available in coun-
tries where daytime running lamps are
mandatory.
With daytime running lamp mode se-
lected and the exterior lamp switch at
position M, the following lamps will
come on automatically when the en-
Lighting sub-
gine is turned on:
Parking lamps and low beam head-
lamps
License plate lamps
i
If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.
For safety reasons, resetting the
Lighting
( page 111) will not reset the daytime
running lamp mode.
In the right display you will then see the
message:
factory settings while driv.!
submenu to factory settings
Cannot be fully reset to
.