Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HDMI SX-EP22
Summary of Contents for HDMI SX-EP22
- Page 1 HDMI Extender over Ethernet Model:SX-EP22 Operating instructions...
-
Page 2: Operating Instructions
Please keep this manual for future reference. FEATURES Compliant HDCP. Flexible and scalable HDMI 1080p High Quality Video Broadcasting with Gigabit Ethernet LAN. Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable. ... - Page 3 Note2: IP and MAC address must be different for one TX to many RX or many TX to many RX configuration. PACKING CONTENTS 1) Main Unit. Transmitter & Receiver HDMI Extender 2) Power adapter DC 5V 1A x2PCS 3) IR-TX cable & IR-RX cable...
- Page 4 Operating Instructions PANEL DESCRIPTIONS Transmitter Panel ① ② ③ Indicator of power input Status of signal connection HDMI input ④ ⑤ ⑥ DIP switch IR-TX port Reset button ⑦ ⑧ Power input port Ethernet port 4 bits DIP Switch: Use 4bits DIP switch to select 16 groups ID ( such as 0001,0010,0101 etc,) Default TX unicast IP address is 192.168.168.55 , it can be configured from webpage.
- Page 5 Operating Instructions Receiver Panel ① ② ③ Indicator of power input Status of signal connection HDMI Output ④ ⑤ ⑥ DIP switch IR-RX port Reset button ⑦ ⑧ Power input port Ethernet port 4 bits DIP Switch: Use 4bits DIP switch to select 16 group ID(such as 0001,0010,0101 etc,) Default RX unicast IP address is 192.168.168.56, it can be configured from webpage.
- Page 6 Transmitter unit 2. Connect one HDMI Cable between the HDMI input port of display and the HDMI output port of Receiver unit. 3. Connect one UTP Cat5e or better cables between the RJ45 port of Transmitter unit and RJ45 port of Receiver unit.
- Page 7 Operating Instructions Point to multicast network configuration: 1. Connect one HDMI Cable between the HDMI output port of source device and the HDMI input port of Transmitter unit 1. . Connect one CAT5e or better cable between the RJ45 port of transmitter and input port of Gigabit Ethernet switch hub.
- Page 8 Transmitter unit. 2. Connect one HDMI Cable between the HDMI input port of display and the HDMI output port of Receiver unit. 3. Connect one CAT5e or better cable between the RJ45 of each Transmitter unit and RJ45 port of Gigabit Ethernet switch hub.
- Page 9 Operating Instructions No need power adapter for TX & RX when connecting with POE Switch. … … … … Modify all TX and all RX for a different IP & MAC address in LAN (local area network）to avoid conflict.
- Page 10 Operating Instructions Setup HDMI TX and HDMI RX A HTTP server is embedded in each TX and RX. you can setup IP address for HDMI extender via web browser. The default IP address of the TX is 192.168.168.55, MAC address is: 00:0b:78:00:60:01.
-
Page 11: Product Service
Operating Instructions PRODUCT SERVICE 1) Damage requiring service: The unit should be serviced by qualified service personnel if: (a)The DC power supply cord or AC adaptor has been damaged; (b)Objects or liquids have gotten into the unit; (c)The unit has been exposed to rain; (d)The unit does not operate normally or exhibits a marked change in performance;...
Need help?
Do you have a question about the SX-EP22 and is the answer not in the manual?
Questions and answers