Table of Contents
Advertisement
7.
When the Service Option window
appears, click Advanced.
8.
The advanced Service Options window
appears. In the Network Protocol and
PVC Setting section, enter in the VPI,
VCI and Framing values supplied by
your ADSL service provider.
In the Select ADSL Mode section, select
the mode(s) recommended by your ADSL
service provider, then click OK.
NOTE: The service mode type will be one of
the following:
ANSI T1.413 Issue 2
ITU G.992.2 Annex A (G.lite)
ITU G.992.1 Annex A (G.dmt)
9.
The previous Service Option window will
appear, click Next.
10. The Network window will appear. Click
the Adapters tab to verify that the ASUS
ADSL PC NIC has been found. Click on
the Protocols tab and verify that the
ADSL Management and Monitor
Interface is present.
NOTE: To review the Network window
properties at any time, right-click the
Network Neighborhood icon and select
Properties.
NOTE: If no previous network devices
have been installed, then the Network
Neighborhood icon will not be present on
the desktop. To open the Network
window, double-click My Computer then
Control Panel then Network.
RFC 1577
RFC 2364
RFC 1483
27
Advertisement
Table of Contents
