Page 1
(1) 0110565 (4) 052901 (15) 0102376 7-outlet power strip shelf 8-32 x 3/8” PHMS 11” zip tie #55443 - InTouch 40 shelf only (no hubs included) (1) 052741 (1) 0110564 (6) 0100167 (8) 0110254-5 7-outlet power strip cord wrap bracket 8-32 x 1/2”...
Page 2
1. Assemble Shelf A. Align and attach the shelf to the cord wrap bracket with (4) 8-32 x 3/8” PHM screws as shown in Figure 1. ® B. Using the narrow slots as guides, apply (6) 3” x 2” adhesive Velcro pads (hook side) to the top of the shelf as shown.
Page 3
3. USB Hub Wiring (#55444 only) Connect the USB cables to the hubs. See USB wiring diagram for reference. Figure 3A. USB Hub Wiring Diagram to laptop, tablet, or wireless Note: Diagram shows USB connections only. router on worksurface Each hub also has a power adapter cord. Hub #1 Hub #2 Hub #3...
Page 4
bundled USB cord wrap route cords cords bracket through holes Shelf Top View Figure 3C Figure 3D Rear View of Shelf cord opening for USB or cord opening for Figure 3E power plug USB or power plug Shelf Bottom View feeder hub Figure 3F 0110562R4 Page 4 of 8...
Page 5
Place the 7-outlet power strip at the bottom of the cart. This power strip can be mounted to the the back of the tablet storage panel or placed in the bottom of the cart. Switch off both power strips. Plug the (7) USB hub power adapters into both power strips. The adapters need to be staggered and plugged in as shown. Figure 3G. Note: 2 hub power adapters can be plugged in next to each other at the end of the power strip opposite the switch.
Page 6
Figure 5C 7-outlet power strip (included in 55443, 55444) 7-outlet power strip (included with cart) attached attached to base panel with Velcro (shown to base panel w/ Velcro (shown with USB Hub ®...
Page 7
6. USB hub start-up Make sure all wires are connected as shown in Figure 3A. Each hub MUST be plugged into the auxiliary power strip at the bottom of the cart. Make sure the tablet USB cables are plugged in at the tablets and the hubs. Make sure power strip is on, and plugged into either the cord reel or a live wall circuit.
Page 8
Warranty Specifications Minimum System Requirements ® ® ® • Computer with Windows 7, Windows Vista , Windows ® ® SP2, Windows 2000 SP4, Mac OS X 10.4 or higher • Computer with USB 1.1 port USB Hub Specs Standards • USB specification version 2.0 1 (data rates of up to 480 Mbps) •...