Table of Contents
Advertisement
F
Shipping Information
Shipping Preparation
Follow these suggestions when preparing to ship the thin client:
1.
Turn off the thin client and external devices.
2.
Disconnect the power cord from the electrical outlet, then from the thin client.
3.
Disconnect the system components and external devices from their power sources, then from the
thin client.
4.
Pack the system components and external devices in their original packing boxes or similar
packaging with sufficient packing material to protect them.
NOTE:
Important Service Repair Information
In all cases, remove and safeguard all external options before returning the thin client to HP for repair
or exchange.
In countries that support customer mail-in repair by returning the same unit to the customer, HP makes
every effort to return the repaired unit with the same internal memory and flash modules that were sent.
In countries that do not support customer mail-in repair by returning the same unit to the customer, all
internal options should be removed and safeguarded in addition to the external options. The thin client
should be restored to the original configuration before returning it to HP for repair.
32
Appendix F Shipping Information
For environmental nonoperating ranges, see
Specifications on page 20
Hide quick links:
Advertisement
Table of Contents
