Installing The Stand - HP t510 Hardware Reference Manual

2.
Align the feet with their holes and press them in securely.
Figure 1-6

Installing the Stand

If you want to use the thin client in a vertical orientation, you will need to install the stand for stability.
To install the stand:
1.
Turn unit upside down.
2.
Position the stand with the wide part toward the front of the unit. Align the tabs on the stand with
the slots on the bottom of the unit.
3.
Insert the tabs into the slots (1) and slide the stand toward the front of the unit until it locks into
place (2).
Figure 1-7
Installing the rubber feet
Installing the stand
Installing the Stand
5