Installing The Antenna (Wireless Models); Installing The Rubber Feet - HP t510 Hardware Reference Manual

Installing the Antenna (Wireless Models)

Screw the antenna in place on the rear of the thin client.
▲
Figure 1-5
CAUTION:

Installing the Rubber Feet

You may want to use your thin client in a horizontal orientation. You can install self-adhesive rubber
feet at the corners of the left side of the unit. The rubber feet help keep the unit safely in place.
CAUTION:
and result in equipment damage.
To install the rubber feet:
1.
Remove the feet from their backing.
4 Chapter 1 Product Features
Installing the antenna
To prevent damage to the antenna mounting, do not overtighten the antenna.
If you use the thin client in a horizontal orientation without the rubber feet, it may slide