Download Print this page

One For All URC 4880 User Manual: Re-assigning Device Keys; Changing Volume Lock; To Change Volume Lock To The Cbl/sat Mode; To Change Volume Lock To The Vcr Mode

4-device video expert plus with learning.
Hide thumbs

Advertisement

RE-ASSIGNING DEVICE KEYS

The One For All 4-Device Video Expert Plus With
Learning remote control can be set up to control a second
TV or VCR, or any combination of four video compo-
nents. For example, to have the unit control a TV, a Cable
Converter, and two VCRs, you will need to re-assign the
unused DVD key to operate the second VCR as follows:
1.
On the remote control, press and hold SET until
the LED blinks twice, then release SET.
2.
Enter 9 - 9 - 2. The LED will blink twice.
3.
Press VCR once, then press DVD once. The LED
will blink twice.
4.
Program the DVD key as a second VCR. See
Programming VCR Control on page 12.
To re-assign other device keys, repeat steps 1 through 4 by
substituting the key sequence from the following chart for
a desired component:
To Re-Assign
Perform Key Sequence
VCR as 2nd TV key:
SET - 9 - 9 - 2 - TV - VCR
VCR as 2nd DVD key:
SET - 9 - 9 - 2 - DVD - VCR
VCR as 2nd Cbl/Sat key:
SET - 9 - 9 - 2 - CBL/SAT - VCR
VCR back to VCR:
SET - 9 - 9 - 2 - VCR - VCR
DVD as 2nd TV key:
SET - 9 - 9 - 2 - TV - DVD
DVD as 2nd VCR key:
SET - 9 - 9 - 2 - VCR - DVD
DVD as 2nd Cbl/Sat key:
SET - 9 - 9 - 2 - CBL/SAT - DVD
DVD back to DVD:
SET - 9 - 9 - 2 - DVD - DVD
CBL/SAT as 2nd TV key:
SET - 9 - 9 - 2 - TV - CBL/SAT
CBL/SAT as 2nd DVD key: SET - 9 - 9 - 2 - DVD - CBL/SAT
CBL/SAT as 2nd VCR key: SET - 9 - 9 - 2 - VCR - CBL/SAT
CBL/SAT back to CBL/SAT: SET - 9 - 9 - 2 - CBL/SAT- CBL/SAT
Upon completion of a re-assignment,the LED will blink
twice to confirm your selection.At that time,you will also
need to program the remote control to control the new com-
ponent (see previous sections on Programming VCR Control,
Programming Cable Converter or Satellite Receiver Control,or
Programming DVD Player Control).
26
CHANGING VOLUME LOCK
The One For All 4-Device Video Expert Plus With
Learning remote control is preset to control the volume
of a component through your TV.
If your TV is not remote controllable, or if you would like
the volume to be controlled by a different component, you
can change the Volume Lock setting to control a volume
through a non-associated mode (e.g., through the cable in
the TV mode).
To change Volume Lock to the CBL/SAT mode:
1.
On the remote control, press and hold SET until
the LED blinks twice, then release SET.
Enter 9 - 9 - 3 and then press CBL/SAT once.
2.
The LED will blink twice.
3.
Now, whenever you press VOL +, VOL –, or
MUTE on the remote control, the volume will be
controlled by your Cable Converter or Satellite
Receiver.
To change Volume Lock to the VCR mode:
1.
On the remote control, press and hold SET until
the LED blinks twice, then release SET.
2.
Enter 9 - 9 - 3 and then press VCR once.
The LED will blink twice.
Now, whenever you press VOL +, VOL –, or
3.
MUTE on the remote control, volume will be
controlled by your VCR.
To change Volume Lock to the DVD mode:
1.
On the remote control, press and hold SET until
the LED blinks twice, then release SET.
2.
Enter 9 - 9 - 3 and then press DVD once.
The LED will blink twice.
3.
Now, whenever you press VOL +, VOL –, or
MUTE on the remote control, volume will be
controlled by your DVD (or LD) player.
27

Advertisement

   Related Manuals for One for All URC 4880

This manual also for:

One for all 4880man

Comments to this Manuals

Symbols: 0
Latest comments: