SEARCHING FOR YOUR CODE
If your video component does not respond to the One For
All 4-Device Video Expert Plus With Learning remote
control after trying all of the codes listed for your brand,
or if your brand is not listed at all, try searching for your
code.
For example, to search for a code for your TV:
1.
Turn on your TV.Set it to the TV mode.
2.
On the remote control, press and hold SET until
the LED blinks twice, then release SET.
3.
Enter 9 - 9 - 1. The LED will blink twice.
4.
Aim the remote control at the the TV and slow-
ly alternate between pressing POWER and TV.
Stop when the TV turns off.
NOTE: In the search mode, the One For All 4-Device
Video Expert Plus With Learning remote control will
send IR codes from its library to the selected compo-
nent, starting with the most popular code first.
Press SET once to lock in the code.
5.
6.
To search for the codes of your other compo-
nents, repeat steps 1 through 5, but substitute
the appropriate key (i.e., DVD, VCR, or CBL/SAT)
for the (DVD/LD,VCR, or Cable/Satellite) com-
ponent you are searching for.
Page 22, 23