Using Bluetooth Wireless Technology; Connection Menu Operation - Pioneer MVH-X360BT Owner's Manual

Section
02 Using this unit
Using Bluetooth wireless
technology
Using the Bluetooth telephone
Important
! Leaving the unit on standby to connect to
your phone via Bluetooth while the engine is
not running can drain the battery.
! Operations may vary depending on the kind
of cellular phone.
! Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Be sure to park your vehicle in
a safe place and apply the parking brake be-
fore proceeding.
Setting up for hands-free phoning
1 Connection
Use the Bluetooth telephone connection
menu. Refer to Connection menu operation on
page 10.
2 Function settings
Use the Bluetooth telephone function menu.
Refer to Phone menu operation on page 11.
Basic operations
Making a phone call
1 Refer to Phone menu operation on page 11.
Answering an incoming call
1 When a call is received, press
Ending a call
1 Press
.
Rejecting an incoming call
1 When a call is received, press and hold
Answering a call waiting
1 When a call is received, press
10
En
Switching between callers on hold
1 Press M.C.
Canceling call waiting
1 Press and hold
.
Adjusting the other party's listening volume
1 Press c or d while talking on the phone.
! When private mode is on, this function is not
available.
Turning private mode on or off
1 Press BAND/
while talking on the phone.
Note
If private mode is selected on the cellular phone,
hands-free phoning may not be available.
Storing and recalling phone numbers
1 To store: Press and hold down one of the
preset tuning buttons (1/
The functions below can be used to store phone
numbers to the memory. For details, refer to
Phone menu operation on page 11.
! MISSED (missed call history)
! DIALED (dialed call history)
! RECEIVED (received call history)
! PHONE BOOK (phone book)
2 To recall: Press one of the preset tuning
buttons (1/ to 6/ ).
3 Press M.C. to make a call.
Switching the display
.
Selecting the desired text information
You can change the display during a call.
1 Press DISP to cycle between the following:
! Call time
! Name of other party
.
! Number of other party
.
Using this unit
Using voice recognition
This feature can be used on an iPhone equipped
with voice recognition that is connected by
Bluetooth.
1 Press and hold M.C. to switch to voice
recognition mode.
2 Press M.C. and then talk into the micro-
phone to input voice commands.
To end voice recognition mode, press BAND/ .
Notes
! For details on voice recognition features,
check the manual for your iPhone.
! In order for your voice commands to be rec-
ognized and interpreted correctly, ensure
that conditions are suitable for recognition.
! Please note that wind blowing through the
vehicle windows and noise coming from out-
to 6/ ).
side the vehicle can interfere with voice com-
mand operation.
! For optimum pick-up, the microphone should
be placed directly in front of the driver at a
suitable distance.
! Speaking too soon after the start of the com-
mand may cause voice recognition to fail.
! Speak slowly, deliberately, and clearly.

Connection menu operation

Important
Connected devices may not work properly if
more than one Bluetooth device is connected at
a time (e.g. a phone and a separate audio player
are connected simultaneously).
1 Press and hold
nection menu.
# You cannot perform this step during a call.
2 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
DEVICELIST (connecting or disconnecting a de-
vice from the device list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you
want to connect/disconnect.
! Press and hold M.C. to swap between the
Bluetooth device address and the device
name.
3 Press M.C. to connect/disconnect the selected
device.
If the connection is established, * is indicated
on the device name.
! When no device is selected in the device list,
this function is not available.
DEL DEVICE (deleting a device from the device
list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you
want to delete.
! Press and hold M.C. to swap between the
Bluetooth device address and the device
name.
3 Press M.C. to display DELETE YES.
4 Press M.C. to delete the device information
from the device list.
! When no device is selected in the device list,
this function is not available.
! While this function is in use, do not turn off
the engine.
ADD DEVICE (connecting a new device)
to display the con-