JVC KA-M790G Instructions Manual: Preparations

Hide thumbs

Advertisement

Remote Control Unit Connection
Connecting the Remote
Control Unit (continued)

Preparations

1
Select the power supply for the camera
Select the power supply for the camera
(including this unit) using the [POWER SELECT]
selection switch on this unit.
[POWER SELECT]
Selection Switch
BATT.
: Uses power from the [DC INPUT]
terminal on the camera or a
battery.
RM
: Uses power from the remote
control unit connected to the [RM]
connector.
2
Turn on the power of the remote control
unit
● Set the [POWER] switch of the remote
control unit to AONB.
● The remote control unit can be operated
about 10 seconds after the [POWER] switch
is set to AONB.
:
Memo
● After the [POWER] switch of the remote
control unit is set to AONB, about 10 seconds
are required for it to establish communication
with this unit.
12
Synchronizing with the Camera
Select the device to input the
Genlock signal
You can select the device to input the Genlock
signal in [Genlock Input] of the [Others] menu on
the camera.
Adapter : Inputs Genlock signal from the
remote control unit via a 26-pin
camera cable.
BNC
: Inputs from the [GENLOCK
INPUT] terminal (E model)/
[GENLOCK/AUX INPUT]
terminal (U model) on the
camera.
Note:
● Perform system phase adjustment on the
device used for Genlock signal input.
Displaying the Return Video
Setting
● To check the return video of the 26-pin
camera cable using this unit, set [Return
Input] in the [Others] menu on the camera to
AAdapterB.
● Select an appropriate [Return Aspect] setting
in the [Others] menu on the camera
according to the aspect ratio of the return
video. (A16:9B or A4:3B)
● Set [Camera Function] menu B
[Switch Set]B[LENS RET] on the camera to
AReturnB.
To display the return video
Press the [RET] button on the lens of the
camera. The return video appears on the
viewfinder or LCD monitor while the button is
pressed down.
[RET] Button

Advertisement

   Related Manuals for JVC KA-M790G

Comments to this Manuals

Symbols: 0
Latest comments: