JVC KA-M790G Instructions Manual page 16

Installation
Attaching this Unit to the
Camera (continued)
4
Attach the battery folder to this unit
A Align the holes on the supplied rubber sheet
with the screw holes on the rear of this unit
B Attach the plate to this unit using the screws
(x4) (only applicable to IDX Battery)
:
Memo
● The battery folder for Anton Bauer Battery
does not come with a plate.
C Connect this unit to the battery folder using
the connectors (x2 or x3)
D Attach the battery folder using the screws
(x4)
E Store the connectors in the storage
compartment
IDX:
Store in the battery folder
Anton Bauer:
Store in the storage compartment of this unit
Note:
● Make sure that the connection wires and
connectors are properly stored and do not
protrude out.
A
Rubber Sheet (Supplied with this unit)
KA-M790G
B
Plate (IDX
Battery Only)
Storage
E
Compartment
(For
Anton
Bauer)
10
Battery Mounting Folder
D
Screw A
Screw B
(For IDX)
E
C
Connectors
Screw A
Battery Folder for
Anton Bauer Battery
5
Attach the battery
Note:
● Do not connect a battery other than those
designated. For details on the type of battery
that can be connected, refer to the
"INSTRUCTIONS" of the camera.