Table of Contents
Advertisement
MC4285.O/M.QXD
1/3/02
TELEPHONE OPERATION (CONTINUED)
TO DELETE 1 CALL/ALL CALLS
1
TO AUTOMATICALLY DIAL A NUMBER IN THE CALLER ID DISPLAY
1
DO NOT pick up the handset. Select the
number using the REVIEW ( )
( )
button, then press the DIAL
button
; "PICKUP OR ADJ" will appear
in the display. If the number shown at the
bottom is exactly how it should be dialed,
simply pick up the phone and the number
will be dialed.
Note:
•
Once the unit's memory is full, any new call forces the deletion of the earliest
call information.
1:36 PM
Page 12
To Delete a Call: While the name and
number are displayed, press the
DELETE button
will appear. Press the DELETE button
again to delete the information.
2
To Delete All Calls: Press and hold
the DELETE button
seconds, "DEL ALL CALLS?" will
appear. Press the DELETE button
again to delete all past information.
Press the REVIEW ( )
cancel.
2
2
1
If you need to change the telephone
or
number (adding an area code or adding
a "1"), simply repeatedly press the DIAL
button until the correct telephone
number/area code appears in the
display, then pick up the handset.
12
once; "DELETE?"
approximately 6
button to
Advertisement
Table of Contents
