Haier HCR2250ADS User Manual page 9

IMPORTANT SAFETY
•
Proper Installation – The
range, when installed, must
be electrically grounded in
accordance with local codes
or, in the absence of local
codes, with the National
Electrical Code, ANSI/NFPA
70. In Canada, the range must
be electrically grounded in
accordance with Canadian
Electrical Code. Be sure the
range is properly installed
and grounded by a qualified
technician.
•
Disconnect the electrical
supply before servicing the
appliance.
•
Injuries may result from the
misuse of appliance doors
or drawers such as stepping,
leaning, or sitting on the
doors or drawers.
•
Maintenance – Keep range
area clear and free from
combustible materials,
gasoline, and other flammable
vapors and liquids.
READ AND SAVE THESE
INSTRUCTIONS
INSTRUCTIONS
•
Top burner flame size should
be adjusted so it does not
extend beyond the edge of
the cooking utensil.
For self-cleaning ranges –
•
Do Not Clean Door Gasket –
The door gasket is essential
for a good seal. Care should
be taken not to rub, damage,
or move the gasket.
•
Do Not Use Oven Cleaners –
No commercial oven cleaner
or oven liner protective
coating of any kind should be
used in or around any part of
the oven.
•
Clean Only Parts Listed in
Manual.
For units with ventilating hood –
•
Clean Ventilating Hoods
Frequently – Grease should
not be allowed to accumulate
on hood or filter.
•
When flambé cooking under
the vent hood, turn the fan
on.
7