Deactivating Con@Ctivity 2.0 - Miele DA 5196 W Operating And Installation Instructions

 Press the Delayed shut down button
515 for approx. 10 seconds until
the 1 indicator appears in the fan
level display.
 Then, press the following buttons in
order:
– The "" button
– Followed by the "" button
– And then the lighting button .
If Con@ctivity 2.0 has been activated,
the indicators for levels 2 and 3 will be
constantly lit.
If Con@ctivity 2.0 has not been
activated, the indicators for levels 2 and
3 will flash simultaneously.
 To exit the check, press the Delayed
shut down button 515. All
indicators will go out.
 To check whether activation has
taken place on the cooktop, please
refer to corresponding operating
instructions.
 If a connection cannot be established
despite activation of the Con@ctivity
function on the hood and the
cooktop, the function must first be
deactivated and then reactivated on
both appliances.

Deactivating Con@ctivity 2.0

 Deactivation on the hood is similar to
the activation procedure. Select the
"" button instead of the "" button.
 To deactivate the cooktop, please
refer to the corresponding operating
instructions.
Activating Con@ctivity 2.0
Please keep in mind that disabling the
connection will also disable any
remote control function being used.
The remote control must then be
reactivated.
43